![](/images/new-backgrounds/1176731/176731121x1.webp)
4. After connecting the drain hose, use a water bottle to pour water into the air outlet of the indoor unit to check the drainage. (To prevent water from flowing all over the place, insert the water bottle deeply into the first blade on the left side of the air outlet and slowly pour water.
Water bottle
• As the draining is of natural drain type, install the drain hose in downward direction.
CAUTION • Be aware that there could be water leakage when the drain hose is not firmly fixed with a cable tie or tape.
•If there is any foreign substance in the drain plate, it may clog the drain pip. Therefore, be sure to remove the foreign substance inside after installation.
•Do not use the drain hose that is connected by number of hoses together.
Things to check after completing the installation
ffBefore supplying the power, use DC 500 V insulation resistance tester to measure the power (L, N) terminal and the outdoor unit grounding.
• Since you may damage the communication circuit if you test the communication terminal, do not test it. CAUTION • Use common circuit tester on communication terminal for open/short circuit.
ENGLISH-61
I06nstallation
PAC MIRAGE