Installing the air conditioner
| • Supply cords of parts of appliances for outdoor use shall not be lighter than polychloroprene sheathed flexible |
NOTE | cord. (Code designation IEC:60245 IEC 57 / CENELEC: |
•This equipment complies with IEC
MODEL | Ssc[MVA] |
AF55JV3MAEEXMG | 0.944 |
AF55JV1MAEEXMG | 0.819 |
• Please use rated wires or products (with heat resistance over 105 °C) of all the wires and the switches or fuses in
CAUTION | the cabinet panel. (Retailer and installer is responsible for the use of parts that does not meet the wire standards | |
or capacity requirements) | ||
|
•Make sure that wires doesn’t make any sparks around the auxiliary power switch or installed in a place with high temperature. (If the ambient temperature is high, allowable current of the wire will decrease and current reduction factor will occur.)
•Please install the auxiliary power switch in a dry place and install panel board or electrical component box.
•Please install circuit breaker in the panel board.
•When connecting the main power, press the wire to the terminal to secure connection.
•Selecting
Silver solder
I06nstallation
Thickness of the wire (mm2) | B (mm) | d2 (mm) |
2.5 | Less than 9.5 | More than 4.5 |
4 | Less than 9.5 | More than 4.5 |
6 | Less than 9.5 | More than 4.5 |
10 | Less than 15 | More than 8.4 |
Connecting the power terminal
ffConnect the cables to the terminal board with solderless ring terminals.
ffOnly sue the certified and rated cables and make sure to firmly connect them without applying any external force to the terminal.
ffConnect with a driver and a wrench that are able to apply the rated torque to the screws.
ffConnect the terminal screws according to the rated tightening torque. If the terminal is loose, fire can occur due to arc heat generation and if the terminal is too tight, terminal board could get damaged.
Screw | M3 | M3.5 | M4 | M5 | M6 |
Tightening torque for terminal (kgf∙cm) | 5.0 ~ 7.5 | 8.0 ~ 12.0 | 12 ~ 18 | 20 ~ 30 | 25 ~ 37.5 |
ENGLISH-49
PAC MIRAGE