Samsung AF55JS1MAEENMG manual Testing operations, ENGLISH-62, Ff3 phases power supply R, S, T, N

Page 62

Testing operations

1.Check the power supply between the outdoor unit and the auxiliary circuit breaker. ff1 phase power supply : L, N

ff3 phases power supply : R, S, T, N

2.Check the indoor unit.

1)Check that you have connected the power and communication cables correctly. (If the power cable and communication cables one mixed up or connected incorrectly, the PCB will be damaged.)

2)Check the thermistor sensor, drain pump/hose, and display are connected correctly.

3.Press K1 or K2 on the outdoor unit PCB to run the test mode and stop.

❋❋K1 button is applicable for AF55JSMAmodel only

ffPress K1 button Start Heating test mode Press K1 button twice Stop Heating test mode 7-seg display : ffPress K2 button Start Cooling test mode Press K2 button three times Stop Cooling test mode 7-seg display : ffPress K1 button twice Start Defrost test mode Press K1 button Stop Defrost test mode 7-seg display :

• Condition of Defrost test mode

-- Condition 1 : The outdoor temperature is under 10 °C

-- Condition 2 : All the temperature conditions should meet the defrost conditions

ffPress K2 button twice Start Inverter Checker mode Press K2 button twice Stop Inverter Checker mode 7-seg display :

ffPress K2 three times Start Pump down mode Press K2 button Stop Pump down mode 7-seg display :

Outdoor unit

ON ON

 

1 2 3 4

1 2 3 4

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4.After 12 minutes of stationary condition check each indoor unit air treatment : ffCooling mode(indoor unit check) Inlet air temp. - Outlet air temp. : From 10 °C to 12 °C ffHeating mode(indoor unit check) Outlet air temp. - Inlet air temp. : From 11 °C to 14 °C

ffIn heating mode, the indoor fan motor can remain off to avoid cold air blown into conditioned space.

5.How to reset the power supply of the outdoor unit and deactivate the eco mode (standby mode) :

ffOutdoor unit type A, B : Press K3 button over 1 sec to reset the power supply of the outdoor unit and deactivate the eco mode (standby mode).

ENGLISH-62

PAC MIRAGE Saudi_IBIM_EN_CS6_DB68-04872A-05.indd 62

2016-08-08 오전 11:38:41

Image 62
Contents Air Conditioner Thank you for purchasing this Samsung productEnergy saving technology with S-inverter system Features of your new air conditionerPowerful speed/Convenient remote operation Auto air flow bladesContents Safety precautions ENGLISH-4ENGLISH-5 P01reparationFor Installation ENGLISH-6For Power Supply Warning ENGLISH-7ENGLISH-8 ENGLISH-9 ENGLISH-10 FfThis may result in property damage ENGLISH-11Do not clean the inside of the air conditioner by yourself ENGLISH-12Checking before use ENGLISH-13Auxiliary power switchELCB, ELB Checking auxiliary power switchOperational temperature and humidity range Mode Indoor temperature Outdoor temperature Indoor humidityENGLISH-15 Checking the name of the partsMain parts To open the panelControl panel and the display ENGLISH-16ENGLISH-17 Checking the remote controllerRemote controller buttons Remote controller display ENGLISH-18Storing the remote controller Using the remote controllerBattery changing time Inserting the batteriesBasic operation ENGLISH-20Adjusting the desired temperature Turning on the powerSelecting the operation mode Selecting the fan speedSelecting air flow direction ENGLISH-22Additional options available in On timer Setting the On/Off timerWhen the air conditioner is off ENGLISH-23When the air conditioner is on ENGLISH-24ENGLISH-25 Using the Turbo functionWhen the air conditioner is operating in Cool or Heat mode Using the Long function ENGLISH-26O04 thers Locking the control panelENGLISH-27 ENGLISH-28 Using the air conditioner with the control panelButton to adjust vertical air flow direction Button againENGLISH-29 Cleaning the indoor unitCleaning the outdoor unit heat exchanger O05 thersCleaning the Air filter ENGLISH-30ENGLISH-31 Maintaining your air conditionerPeriodical checks Dust, etcENGLISH-32 May have deposited at low temperaturesInternal protections via the unit control system Type DescriptionTroubleshooting ENGLISH-33Come out of the air Turned on Conditioner ENGLISH-34Generate any odor ENGLISH-35Noise is generated ENGLISH-36ENGLISH-37 Accessing its internal componentsGeneral information I06nstallationDo not install the air conditioner in following places Installing the unitPower supply line, fuse or circuit breaker ENGLISH-38Part Name Accessory parts listENGLISH-39 Side view Selection of installation placeIndoor unit Outdoor unitWhen 3 sides of the outdoor unit are blocked by the wall Single installationWhen the air outlet is opposite the wall ENGLISH-41When installing more than 1 outdoor unit ENGLISH-42Outdoor unit base mount and anchor bolt position ENGLISH-43ENGLISH-44 Preparing the installationSelecting appropriate location for installation ENGLISH-45 Drilling a hole in a wallSpace requirements Wear protective goggles and mask before sprayingOil trap Installing the air conditionerRefrigerant pipe work Insulating the pipes ENGLISH-46ENGLISH-47 Refrigerant piping workElectrical work Removing the connection pipePower specification ENGLISH-48Or capacity requirements Connecting the power terminalENGLISH-49 AF55J1MA Series / Ackpcc Series Connecting the wiresENGLISH-50 Order of electrical connection FfEntire system diagramFfPower wiring diagram ENGLISH-51ENGLISH-52 FfEntire system diagram Power supply cableFfIndoor and outdoor unit connection diagram AF55J3MA SeriesPrepare the following tools How to connect your extended power cablesENGLISH-53 Contraction tubeApply heat to the contraction tube to contract it ENGLISH-54FfMethod Checking the earthing ENGLISH-55ENGLISH-56 Nm = 10 kgfcm Charging the refrigerant and preventing refrigerant leakageENGLISH-57 ENGLISH-58 Pressure table for temperaturesIndoor temperature C Dry bulb / Wet bulb ENGLISH-59 FfFix the pipe with a clamp and screwsFix them with a cable tie or tape Connecting drain hose of indoor and outdoor unitENGLISH-60 Things to check after completing the installation ENGLISH-61ENGLISH-62 Testing operationsFf3 phases power supply R, S, T, N Check the indoor unitUnit Short Display contentsENGLISH-63 PushFor 4 indoor unit connection FfDIP switchSW508 option DIP switch optionFfDIP switchSW507 option ENGLISH-64ENGLISH-65 Meaning RemarksENGLISH-66 After pipe extensionPacking and unpacking guide ENGLISH-67ENGLISH-68 Product specification ENGLISH-69ENGLISH-70 ENGLISH-71 Design PressureQuestions or COMMENTS?
Related manuals
Manual 72 pages 59.62 Kb

AF55JV1MAEENMG, AF55JV1MAAPNMG, AF55JV3MAEENMG, AF55JS1MAEENMG, AF55JS1MAAPNMG specifications

The Samsung AF55JS3MAAPNMG, AF55MV1MAEENMG, AF55JV1MAEEXMG, AF55JV3MAAPNMG, and AF55JS3MAEENMG series of displays represent the pinnacle of modern digital signage technology. These models are designed for a variety of commercial applications, ranging from retail environments to corporate settings, providing a comprehensive solution for any visual communication need.

One of the standout features of these displays is their impressive picture quality. Equipped with Samsung's advanced LED technology, these monitors deliver vibrant colors, deep blacks, and excellent contrast ratios. This ensures that content is not only visually appealing but also easy to read, making it ideal for advertising and information dissemination.

The AF series incorporates Smart Hub technology, which allows for seamless access to various applications and content management systems. This feature streamlines the process of displaying digital signage content, enabling users to easily update and manage their information from a centralized location. The integration of this technology enhances the overall user experience and simplifies operations within retail and corporate environments.

These displays also boast a wide viewing angle, which ensures that content is visible from multiple perspectives. This is particularly advantageous in high-traffic areas where customers or employees may be viewing the screen from different locations. The result is enhanced engagement and improved communication, which are essential for effective digital signage.

In terms of durability, the AF55 series is built to withstand the rigors of continuous operation. The models are designed for 24/7 usage, making them ideal for environments that require round-the-clock operation. Their robust construction ensures reliability and longevity, providing businesses with a sound investment over time.

Additionally, energy efficiency is a key characteristic of the Samsung AF55 displays. These models are designed to consume less power without compromising on performance, contributing to lower operational costs and a reduced environmental impact.

Moreover, the flexibility in installation is another notable feature. These displays can be mounted in various orientations, including landscape and portrait modes, allowing businesses to customize their setup based on the space available and the nature of the content being displayed.

In summary, the Samsung AF55 series models are equipped with advanced technologies, superior picture quality, and solid durability. Their flexible application, energy efficiency, and user-friendly management features make them a top choice for businesses looking to leverage digital signage effectively.