Samsung AR24NVFHEWKXMG, AR24NSFHEWKNMG Packing and Unpacking, Unit mm, Indoor unit, Outdoor unit

Page 30

When installing more than 1 outdoor unit					(5 cases)
					(Unit: mm)
1500	600	3000	3000	200
				300
	600		600	1500
				1500
					300
300	600	600	600
	500	300
	500
	500	300
	500

Step 1.2 Packing and Unpacking

Indoor unit

Packing the unit as below procedure

1Put the indoor unit onto the packing case.

2Assemble cushion-both side of indoor unit. (Left and Right)

3Seal the packing case.

Unpacking the unit as below procedure

1Open the packing case.

2Take out the both side of cushion(Left and Right).

3Move the set from the packing case.

Outdoor unit

Packing the unit as below procedure

1Put the outdoor unit onto the cushion-bottom.

2Put the cushion-top onto the outdoor unit

3Put the packing case from the top of set.

4Seal the packing case.

Unpacking the unit as below procedure

1Take out the packing case from the set.

2Take out the cushion-top.

3Move the set from the cushion-bottom.

Installation

CAUTION

•If the outdoor unit is installed with any insufficient clearance, it may generate sound and affect the whole product.

•Be sure to install the outdoor unit in a level place where its vibration does not affect the whole product

30English

Image 30

Contents Air conditioner Contents Correct disposal of batteries in this product Safety Information Failing to do so may result in electric shock or fireThis may result in electric shock or fire For Power Supply This may result in electric shock or burns Do not touch the circuit breakerwith wet handsThis may result in electric shock This may result in children seriously injuring themselvesDo not clean the inside of the air conditioner by yourself Do not operate the appliance with wet handsDo not drink the water from the air conditioner Indoor Unit Overview Timer indicatorOperation indicator DisplayRemote Control Overview Inserting batteriesRemote Control Operation Controlling temperatureOperation modes Controlling fan speed Controlling air flow directionHorizontal air flow manual Cool mode Cooling OperationStep cooling function Dry mode Dehumidifying OperationHeat mode Heating OperationQuick Smart Features Auto modeFan mode Fast function Comfort functionQuiet function Beep sound functionEnergy-Saving Operation Single user functionTimed on/Timed off function Good’sleep function Cleaning duration Minutes Cleaning at a GlanceRunning Auto clean Do not clean the display by using alkaline detergentCleaning the filter Troubleshooting Does not work Setting the time Indicator blinks Problem Solution Cannot change the fanReplace the batteries in the remote control with new ones Check whether the drains are clean. Clean them regularlyTechnical Specifications Model27˚C 29˚C 20˚C Installation of the unit General informationPower supply line, fuse, or circuit breaker Install the unit in a place where water can drain smoothlyInstallation manual Choosing the installation location Minimum clearances for the outdoor unitCases Indoor unit Packing and UnpackingUnit mm Outdoor unitAccessories Accessories in the indoor unit packageOptional accessories Accessories in the outdoor unit package Drilling a hole through the wallTools Taping the pipes, cables, and drain hose Indoor Unit Installation Optional Extending the power cable Prepare the following toolsApply heat to the contraction tube to contract it Optional Extending the drain hose Installing and connecting the drain hoseInstall the drain hose Or a fireOptional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe Fixing the installation plate When fixing the indoor unit on a wallWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum board Fix the installation plate without inclining to one sideOutdoor Unit Installation Refrigerant pipesOptional Fixing the outdoor unit to a wall with a rack Leave the system in the standby mode Evacuating the airCooling capacity and malfunction. Use a vacuum pump Adding refrigerant RefrigerantInstallation Inspection Running the Smart Install modePerforming the gas leak tests Off, Blinking, On LEDPerforming final check and trial operation Pumping down for removing the productQuestions or COMMENTS?

Related manuals

Manual 48 pages 7.93 Kb