Samsung SDM-160N manual Xxxxxxxxxxx

Page 31

Digital Multiplexer

-The blinking character moves if pressing “→ ”, “→” button.

-The setting value is changed if pressing “→”, “→ ” button.

SENSITIVITY: OFF ↔ LOW ↔ MEDIUM ↔ HIGH

•Set sensitivity of motion detection.

•Do not perform motion detection if “OFF”.

AREA SET: CH1 ~ CH16

•Set the motion detection area for each channel.

MOTION OUT: OFF ↔ ON

•Set the MOTION OUT(M/O) in the motion detection.

•“MOTION OUT” continues for the “ALARM HOLD TIME” that is set in the MENU.

LIST UPDATE: OFF ↔ ON

•Set whether detection contents are recorded on the list.

BUZZER: OFF ↔ ON

•Set existence of warning sound in the motion detection.

-The background screen is changed to the relevant channel and the following screen is displayed if pressing the “ENTER” button with the blinking indication placed at the “AREA SET”:

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

XXXXXXXXXXX ■■■■■■

•The ■ position is a detection area.

•In setting to PIXEL unit: Move to the line to detect using the “→”, “→” button and press the “CAMERA SELECT” (1 ~ 16) button equivalent to the desired position. It is released if pressing the button once more.

•In selection of line: The line is selected if pressing “→ ” button after moving to the line to detect using the “→ ”, “→” button. In case of release, press the “→ ” button.

•In selection of whole of area: Press the “ENTER” button. Press the “ENTER” button in release.

•The changed setting value is stored if pressing the “SET” button and you can return to the “MOTION SET” menu.

ENGLISH

5-8

Image 31

Contents Digitalmultiplexer Digital Multiplexer Graphic Symbol ExplanationIii Contents Appendix B Checking Points in Trouble Introduction IntroductionName of parts and Function Move → Connects to Power Cord Indicates terminal for connecting to VCR Input/OutputWith RS-232C cable, Remote Control can be done With RS-485 cable, Remote Control can be donePhysical & Environmental Preparing for the InstallationPrecautions when Installing Page Unpacking OUT terminal on the VCR Connecting to Other DevicesConnecting to normal VCR and Monitor Connecting to S-VHS VCR and S-VHS MonitorConnecting to Time Lapse VCR Connecting to Alarm Sensor Ascii Aauto Remote Control by connecting to PCAscii CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9Spot OUT Control Remote Control using SSC-1000RS-485Monitor OUT Control MON button → Address + 1 input → EnterInitial operation When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen Basic Method to useWhen desiring to see in the division screen When desiring to see in the Full screenWhen desiring to see automatic sequential conversion screen When desiring to see in the zoom screen When desiring to see the stop screenFull Mode When desiring to see in the record screen When desiring to see in the PIP screenWhen desiring to see output of VCR as it is Duty SET Reservation OFF Setting of Program MenuRecord setting of each camera REC OUT SET Type TLVREC Reservation Start Time REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9END Time PB Display ALL Spot OUT Cvbs PIP Size Setting of display modeSequence Loss Detect Loss Info Alarm Info Motion Info ALLSequence Alarm S/W TimeEnter button at a position desired to set title Setting of title by channelYou can set of each channel Blinking character moves if pressing →, → buttonIjklmnopqrstuvwxyz Title SETDATE/TIME SET Display Type Setting of motion Setting of alarmXxxxxxxxxxx Baud Rate System settingPassword Change Password Check OFF Alarm Buzzer Loss Buzzer Summer TimeEnter the current password in order Password Change Password Check NEW Password ConfirmIs displayed on screen when entering password Time Lapse record mode Normal record modeRecording REC Duty Weight value REC Duty recordAlarm weight value record Reservation recordAlarm signal standard Alarm occurrence conditionsAlarm release Alarm recordOperation in video loss Alarm/Loss list referenceOperation in motion detection Appendix a Specifications Outside Drawing Appendix B Checking points in trouble Ensure power cord is properly inserted