Samsung SDM-160N manual Move →

Page 8

Digital Multiplexer

E.SETUP/FUNCTION

-MENU

Pressing this Button will make LED lit, and MAIN MENU appears on the screen.

-ENTER

Used when switching from MAIN MENU to SUB MENU.

-SET

This function is used when moving from SUB MENU to MAIN MENU after setting programs on each MENU screen, or is used when setting each channel for multi-screen. When setting channels for multi-screen, the channel number flashes.

-SEQUENCE

When pressing this Button, each Channel will automatically be switched to the next channel sequentially with some time intervals, and LED should illuminate. Pressing again will stop illuminating, and stops sequencing.

-FREEZE

When pressing this Button, selected screen becomes still, and LED should illuminate.

-ZOOM

When pressing this Button, the screen should enlarge. Pressing once enlarges twice, and another pressing enlarges 4 times, and pressing once again will bring the screen back to normal.

F. MOVE (→

,

→

,

→

,→ )

This function is used when setting Program Menu, Channel of Multi-screen, and Zoom Mode, and also when moving Cursor.

1-3

Image 8

Contents Digitalmultiplexer Graphic Symbol Explanation Digital MultiplexerIii Contents Appendix B Checking Points in Trouble Introduction IntroductionName of parts and Function Move → Indicates terminal for connecting to VCR Input/Output With RS-232C cable, Remote Control can be doneWith RS-485 cable, Remote Control can be done Connects to Power CordPreparing for the Installation Physical & EnvironmentalPrecautions when Installing Page Unpacking Connecting to Other Devices Connecting to normal VCR and MonitorConnecting to S-VHS VCR and S-VHS Monitor OUT terminal on the VCRConnecting to Time Lapse VCR Connecting to Alarm Sensor Remote Control by connecting to PC AsciiCH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Ascii AautoRemote Control using SSC-1000RS-485 Monitor OUT ControlMON button → Address + 1 input → Enter Spot OUT ControlWhen desiring to see in the live screen/replay screen When desiring to see in the Triplex screenBasic Method to use Initial operationWhen desiring to see in the Full screen When desiring to see in the division screenWhen desiring to see automatic sequential conversion screen Full Mode When desiring to see the stop screenWhen desiring to see in the zoom screen When desiring to see output of VCR as it is When desiring to see in the PIP screenWhen desiring to see in the record screen Setting of Program Menu Record setting of each cameraREC OUT SET Type TLV Duty SET Reservation OFFEND Time REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9REC Reservation Start Time Setting of display mode Sequence Loss Detect Loss Info Alarm Info Motion InfoALL PB Display ALL Spot OUT Cvbs PIP SizeAlarm S/W Time SequenceSetting of title by channel You can set of each channelBlinking character moves if pressing →, → button Enter button at a position desired to set titleDATE/TIME SET Display Type Title SETIjklmnopqrstuvwxyz Setting of alarm Setting of motionXxxxxxxxxxx System setting Password ChangePassword Check OFF Alarm Buzzer Loss Buzzer Summer Time Baud RateIs displayed on screen when entering password Password Change Password Check NEW Password ConfirmEnter the current password in order Recording Normal record modeTime Lapse record mode Weight value REC Duty record Alarm weight value recordReservation record REC DutyAlarm occurrence conditions Alarm releaseAlarm record Alarm signal standardOperation in motion detection Alarm/Loss list referenceOperation in video loss Appendix a Specifications Outside Drawing Ensure power cord is properly inserted Appendix B Checking points in trouble