Samsung SDM-160N manual Alarm/Loss list reference, Operation in video loss

Page 37

Digital Multiplexer

5. Alarm/Loss list reference

If pressing the “LIST” button on the front, alarm, channel loss and motion detection information recently occurred is output up to 100EA (10EA x 10 page) on screen in the occurrence as follows:

ENGLISH

[ALARM/LOSS LIST] 1/3

YY/MM/DD HH:MM:SS CH

1.00/ 02/ 01 12: 30: 30 A 01

2.00/ 01/ 31 12: 30: 30 L 02

3.00/ 01/ 30 12: 30: 30 L 03

4.00/ 01/ 29 12: 30: 30 A 04

5.00/ 01/ 28 12: 30: 30 M 05

6.00/ 01/ 27 12: 30: 30 M 10

7.00/ 01/ 26 12: 30: 30 A 16

8.00/ 01/ 25 12: 30: 30 L 03

9.00/ 01/ 24 12: 30: 30 A 13

10.00/ 01/ 23 12: 30: 30 A 11

 

Current page/ whole page

 

 

 

 

 

[ALARM/LOSS LIST]

2/3

 

 

 

 

YY/MM/DD

HH:MM:SS

CH

RIGHT

 

11.

00/ 02/ 01

12: 30: 30 A

01

 

 

 

 

 

 

12. 00/ 01/ 31

12: 30: 30 L

02

 

 

 

13.

00/ 01/ 30

12: 30: 30 L

03

 

 

 

14.

00/ 01/ 29

12: 30: 30 A

04

 

 

 

 

 

 

15.

00/ 01/ 28

12: 30: 30 M

05

LEFT

16.

00/ 01/ 27

12: 30: 30 M

10

 

 

 

 

 

 

17.

00/ 01/ 26

12: 30: 30 A

16

 

 

 

18.

00/ 01/ 25

12: 30: 30 L

03

 

 

 

19.

00/ 01/ 24

12: 30: 30 A

13

 

 

 

20.

00/ 01/ 23

12: 30: 30 A

11

RIGHT

LEFT

[ALARM/LOSS LIST] 3/3

YY/MM/DD HH:MM:SS CH

21.00/ 02/ 01 12: 30: 30 A 01

22.00/ 01/ 31 12: 30: 30 L 02

23.00/ 01/ 30 12: 30: 30 L 03

24.00/ 01/ 29 12: 30: 30 A 04

25.00/ 01/ 28 12: 30: 30 M 05

26.00/ 01/ 27 12: 30: 30 M 10

27.00/ 01/ 26 12: 30: 30 A 16

28.00/ 01/ 25 12: 30: 30 L 03

29.00/ 01/ 24 12: 30: 30 A 13

30.00/ 01/ 23 12: 30: 30 A 11

Position is changed

ALARM

: “A”

depending on the date

LOSS

: “L”

display type.

MOTION

: “M”

-Page moves if pressing “→ ”, “→ ” button.

-Update is performed if loss occurs and motion is detected in the status that list is displayed.

-The list screen disappear and alarm operation is performed in the status that list is displayed.

-The oldest information, namely the last page is erased page by page if pressing the “RESET/ERASE” button.

6. Operation in video loss

The following operation is performed if the failure occurs in signal due to poor cable and cutting, etc for the channel that is set to “ON” in the “LOSS DETECT” of the “2.MON OUT SET” in the main menu:

1)Warning tone sounds (if buzzer turns “ON”).

2)Loss information (date and time when loss occurs) is recorded on the alarm/loss list.

3)The “RESET” LED blinks.

4)Display loss information on screen using character (if the loss information turns “ON”).

7.Operation in motion detection

The following operation is performed if the motion is detected in the channel set to “6.MOTION SET” in the main menu:

1)Warning tone sounds (if buzzer turns “ON”).

2)Information (date and time when motion detection occurs) is recorded on the alarm/loss list.

3)The “RESET” LED blinks.

4)Display motion detection information on screen using character (if the “LIST UPDATE” of the “MOTION SET” is set to “ON”).

5)MOTION OUT (M/O) signal becomes active.

(If the “MOTION OUT” setting of the “6.MOTION SET” is set to “ON”)

7-2

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Digitalmultiplexer Digital Multiplexer Graphic Symbol ExplanationIii Contents Appendix B Checking Points in Trouble Introduction IntroductionName of parts and Function Move → With RS-232C cable, Remote Control can be done Indicates terminal for connecting to VCR Input/OutputWith RS-485 cable, Remote Control can be done Connects to Power CordPhysical & Environmental Preparing for the InstallationPrecautions when Installing Page Unpacking Connecting to normal VCR and Monitor Connecting to Other DevicesConnecting to S-VHS VCR and S-VHS Monitor OUT terminal on the VCRConnecting to Time Lapse VCR Connecting to Alarm Sensor Ascii Remote Control by connecting to PCCH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Ascii AautoMonitor OUT Control Remote Control using SSC-1000RS-485MON button → Address + 1 input → Enter Spot OUT ControlWhen desiring to see in the Triplex screen When desiring to see in the live screen/replay screenBasic Method to use Initial operationWhen desiring to see in the division screen When desiring to see in the Full screenWhen desiring to see automatic sequential conversion screen When desiring to see in the zoom screen When desiring to see the stop screenFull Mode When desiring to see in the record screen When desiring to see in the PIP screenWhen desiring to see output of VCR as it is Record setting of each camera Setting of Program MenuREC OUT SET Type TLV Duty SET Reservation OFFREC Reservation Start Time REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9END Time Sequence Loss Detect Loss Info Alarm Info Motion Info Setting of display modeALL PB Display ALL Spot OUT Cvbs PIP SizeSequence Alarm S/W TimeYou can set of each channel Setting of title by channelBlinking character moves if pressing →, → button Enter button at a position desired to set titleIjklmnopqrstuvwxyz Title SETDATE/TIME SET Display Type Setting of motion Setting of alarmXxxxxxxxxxx Password Change System settingPassword Check OFF Alarm Buzzer Loss Buzzer Summer Time Baud RateEnter the current password in order Password Change Password Check NEW Password ConfirmIs displayed on screen when entering password Time Lapse record mode Normal record modeRecording Alarm weight value record Weight value REC Duty recordReservation record REC DutyAlarm release Alarm occurrence conditionsAlarm record Alarm signal standardOperation in video loss Alarm/Loss list referenceOperation in motion detection Appendix a Specifications Outside Drawing Appendix B Checking points in trouble Ensure power cord is properly inserted
Top Page Image Contents