Samsung SDM-160N manual Appendix a Specifications

Page 38

Digital Multiplexer

Appendix A Specifications

1) Image input

Camera: 16 input (BNC Type, Loop Through) 1.0Vp-p, 75 Ω automatic termination, CVBS

VCR : 2 input (VCR Playback input)

CVBS entry (BNC Type),1.0Vp-p, 75Ω terminations S-VHS Y/C input – Y: 1.0Vp-p, 75Ω terminations

– C: 0.286Vp-p(NTSC), 0.3Vp-p(PAL) 75 Ω terminations

SDM-160M/SDM-160MP:Not used.

2) Image output

Monitor: 3 output

 

 

SPOT output (BNC Type),1.0Vp-p, 75Ω termination

 

Main monitor output (BNC Type),1.0Vp-p, 75 Ω terminations

 

S-VHS Y/C output – Y: 1.0Vp-p, 75 Ω

terminations

 

– C: 0.286Vp-p(NTSC), 0.3Vp-p(PAL) 75Ω

termination

SDM-160M/SDM-160MP:Not used.

 

VCR : 2 output

 

 

VCR output (BNC Type),1.0Vp-p, 75Ω

terminations

 

S-VHS Y/C output – Y: 1.0Vp-p, 75Ω

terminations

 

– C: 0.286Vp-p(NTSC), 0.3Vp-p(PAL) 75Ω

terminations

SDM-160M/SDM-160MP:Not used.

 

3) ALARM/MOTION function

16 input: Outside alarm input, programmable N.O or N.C in menu

3 output: Alarm Output output, relay maked active MOTION OUT(M/O) output,maked active

Alarm Reset output, OPEN COLLECTOR, TTL “L” LEVEL

Alarm hold time: 0 ~ 30 minute 59 seconds (in second)

4) AUTO SWITCHER

Auto switcher time: Selectable of 0 ~ 30 seconds

5)Multiple output screen: Full, 2,4,7,9,10,13,16, Zoom, PIP

6)Cathodized bit numbers: 8 BIT (256 pairs)

7)Sampling frequency: 4*FSC

8)Horizontal resolution: More than 400TV Lines

9)Memory Back UP: 5 years

10)Operation temperature: 0° C ~ 40° C

11)Rated voltage: AC 100 ~ 240V, 50/60Hz

12)Power consumption: less than 14 WATTS

13)Outside dimension: (W x H x D): 430 x 88 x 350 mm

14)Weight: Appr. 5.0 Kg (excluding packing materials)

A-1

Image 38
Contents Digitalmultiplexer Graphic Symbol Explanation Digital MultiplexerIii Contents Appendix B Checking Points in Trouble Introduction IntroductionName of parts and Function Move → With RS-485 cable, Remote Control can be done Indicates terminal for connecting to VCR Input/OutputWith RS-232C cable, Remote Control can be done Connects to Power CordPreparing for the Installation Physical & EnvironmentalPrecautions when Installing Page Unpacking Connecting to S-VHS VCR and S-VHS Monitor Connecting to Other DevicesConnecting to normal VCR and Monitor OUT terminal on the VCRConnecting to Time Lapse VCR Connecting to Alarm Sensor CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Remote Control by connecting to PCAscii Ascii AautoMON button → Address + 1 input → Enter Remote Control using SSC-1000RS-485Monitor OUT Control Spot OUT ControlBasic Method to use When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen Initial operationWhen desiring to see in the Full screen When desiring to see in the division screenWhen desiring to see automatic sequential conversion screen Full Mode When desiring to see the stop screenWhen desiring to see in the zoom screen When desiring to see output of VCR as it is When desiring to see in the PIP screenWhen desiring to see in the record screen REC OUT SET Type TLV Setting of Program MenuRecord setting of each camera Duty SET Reservation OFFEND Time REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9REC Reservation Start Time ALL Setting of display modeSequence Loss Detect Loss Info Alarm Info Motion Info PB Display ALL Spot OUT Cvbs PIP SizeAlarm S/W Time SequenceBlinking character moves if pressing →, → button Setting of title by channelYou can set of each channel Enter button at a position desired to set titleDATE/TIME SET Display Type Title SETIjklmnopqrstuvwxyz Setting of alarm Setting of motionXxxxxxxxxxx Password Check OFF Alarm Buzzer Loss Buzzer Summer Time System settingPassword Change Baud RateIs displayed on screen when entering password Password Change Password Check NEW Password ConfirmEnter the current password in order Recording Normal record modeTime Lapse record mode Reservation record Weight value REC Duty recordAlarm weight value record REC DutyAlarm record Alarm occurrence conditionsAlarm release Alarm signal standardOperation in motion detection Alarm/Loss list referenceOperation in video loss Appendix a Specifications Outside Drawing Ensure power cord is properly inserted Appendix B Checking points in trouble