Samsung SDM-160N Appendix B Checking points in trouble, Ensure power cord is properly inserted

Page 40

Digital Multiplexer

Appendix B Checking points in trouble

There may be a case not to use system properly since unexpected status occurs while using the system. In this case, such status is actually caused by a critical error in system but a simple first-aid can solve this status in the most case.

The following items must be checked when problem occurs in the use of this unit.

When power does not turn on.

Ensure power cord is properly inserted.

When screen does not appear though the power cord is inserted.

Ensure connection to the camera, monitor output terminal is properly performed.

When record is not done.

Ensure the connection between the video-in terminal of VCR and the VCR OUT of this unit is properly performed.

Ensure the record tape inserted into VCR is set to RECORD PROHIBITION.

When record is not performed in the time lapse mode.

Ensure the connection between the video-in terminal of VCR and the VCR OUT of this unit is properly performed.

Ensure the “REC TYPE” of the “1.REC OUT SET” among the main menu is “TLV”.

Ensure the REC trigger output terminal of the time lapse VCR is connected to the VTI terminal of this unit.

When record tape is not replayed.

Ensure the connection between the video-out terminal of VCR and the VCR IN of this unit is properly performed.

Ensure the connection between the video-in terminal of monitor and the MON OUT of this unit is properly performed.

When S-VHS record is not performed.

Ensure the S-VHS IN/OUT is properly connected.

SDM-160M/SDM-160MP:Not used.

When cannot see screen with the automatic switcher mode.

Ensure the screen is now in the live mode.

Ensure the time of “SEQUENCE” is set to “0” second.

The relevant channel is skipped when setting to “0” second.

NOTE

Simultaneously check even the operation status of the VCR connected when problem occurs in relation with VCR record/replay.

If problem is not solved even after checking above items and taking a step, always contact to the sale agency and request the help of expert.

B-1

Image 40
Contents Digitalmultiplexer Graphic Symbol Explanation Digital MultiplexerIii Contents Appendix B Checking Points in Trouble Introduction IntroductionName of parts and Function Move → Indicates terminal for connecting to VCR Input/Output With RS-232C cable, Remote Control can be doneWith RS-485 cable, Remote Control can be done Connects to Power CordPreparing for the Installation Physical & EnvironmentalPrecautions when Installing Page Unpacking Connecting to Other Devices Connecting to normal VCR and MonitorConnecting to S-VHS VCR and S-VHS Monitor OUT terminal on the VCRConnecting to Time Lapse VCR Connecting to Alarm Sensor Remote Control by connecting to PC AsciiCH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Ascii AautoRemote Control using SSC-1000RS-485 Monitor OUT ControlMON button → Address + 1 input → Enter Spot OUT ControlWhen desiring to see in the live screen/replay screen When desiring to see in the Triplex screenBasic Method to use Initial operationWhen desiring to see in the Full screen When desiring to see in the division screenWhen desiring to see automatic sequential conversion screen When desiring to see in the zoom screen When desiring to see the stop screenFull Mode When desiring to see in the record screen When desiring to see in the PIP screenWhen desiring to see output of VCR as it is Setting of Program Menu Record setting of each cameraREC OUT SET Type TLV Duty SET Reservation OFFREC Reservation Start Time REC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9END Time Setting of display mode Sequence Loss Detect Loss Info Alarm Info Motion InfoALL PB Display ALL Spot OUT Cvbs PIP SizeAlarm S/W Time SequenceSetting of title by channel You can set of each channelBlinking character moves if pressing →, → button Enter button at a position desired to set titleIjklmnopqrstuvwxyz Title SETDATE/TIME SET Display Type Setting of alarm Setting of motionXxxxxxxxxxx System setting Password ChangePassword Check OFF Alarm Buzzer Loss Buzzer Summer Time Baud RateEnter the current password in order Password Change Password Check NEW Password ConfirmIs displayed on screen when entering password Time Lapse record mode Normal record modeRecording Weight value REC Duty record Alarm weight value recordReservation record REC DutyAlarm occurrence conditions Alarm releaseAlarm record Alarm signal standardOperation in video loss Alarm/Loss list referenceOperation in motion detection Appendix a Specifications Outside Drawing Ensure power cord is properly inserted Appendix B Checking points in trouble