Samsung SDM-160N manual Introduction

Page 6

Digital Multiplexer

CHAPTER 1.INTRODUCTION

Introduction

This unit can combine up to 16 Camera Images onto one VCR, and both frequent recording and sequential recording can be possible in the unit of Frame and Field, and assigned channel can be played back selectively, and it is Triplex with which Live Mode, Playback Mode, and Live plus Playback Mode can be done in one monitor.

Functions and Features

System Setup Menu Button allows you to configure the system the way you want.

Up to 16 asynchronous camera images can be connected.

Up to 16 camera images can be combined onto one monitor so that multi-screen viewing is made possible.

Multi-view screen which supports simultaneous viewing of live cameras during playback of recorded scenes.

4xzoom is allowed.

Built-in Video Motion Detection Function.

Using Spot Output, specific screen can be monitored.

With Freeze Function, you can view a still picture.

With Auto Sequence Mode, each channel can be viewed sequentially.

Date, Time, and Alarm Display Functions can be reset.

For remote control, RS-232C or RS-485 Cable can be connected to PC.

This unit can be powered from 100 to 240V AC.

When Alarm Signal was input, the CHANNEL number, which indicates ALARM, is displayed with warning sound.

Such ALARM information is recorded in ALARM LIST.

With the Channel Loss Detection function, if Channel Loss occurs, the CHANNEL number, which indi- cates LOSS, is displayed. Such CHANNEL LOSS information is recorded in “ALARM/LOSS LIST.”

1-1

Image 6
Contents Digitalmultiplexer Graphic Symbol Explanation Digital MultiplexerIii Contents Appendix B Checking Points in Trouble Introduction IntroductionName of parts and Function Move → With RS-485 cable, Remote Control can be done Indicates terminal for connecting to VCR Input/OutputWith RS-232C cable, Remote Control can be done Connects to Power CordPreparing for the Installation Physical & EnvironmentalPrecautions when Installing Page Unpacking Connecting to S-VHS VCR and S-VHS Monitor Connecting to Other DevicesConnecting to normal VCR and Monitor OUT terminal on the VCRConnecting to Time Lapse VCR Connecting to Alarm Sensor CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 Remote Control by connecting to PCAscii Ascii AautoMON button → Address + 1 input → Enter Remote Control using SSC-1000RS-485Monitor OUT Control Spot OUT ControlBasic Method to use When desiring to see in the live screen/replay screenWhen desiring to see in the Triplex screen Initial operationWhen desiring to see in the Full screen When desiring to see in the division screenWhen desiring to see automatic sequential conversion screen When desiring to see the stop screen When desiring to see in the zoom screenFull Mode When desiring to see in the PIP screen When desiring to see in the record screenWhen desiring to see output of VCR as it is REC OUT SET Type TLV Setting of Program MenuRecord setting of each camera Duty SET Reservation OFFREC Duty SET CH1 CH2 CH3 CH4 CH5 CH6 CH7 CH8 CH9 REC Reservation Start TimeEND Time ALL Setting of display modeSequence Loss Detect Loss Info Alarm Info Motion Info PB Display ALL Spot OUT Cvbs PIP SizeAlarm S/W Time SequenceBlinking character moves if pressing →, → button Setting of title by channelYou can set of each channel Enter button at a position desired to set titleTitle SET IjklmnopqrstuvwxyzDATE/TIME SET Display Type Setting of alarm Setting of motionXxxxxxxxxxx Password Check OFF Alarm Buzzer Loss Buzzer Summer Time System settingPassword Change Baud RatePassword Change Password Check NEW Password Confirm Enter the current password in orderIs displayed on screen when entering password Normal record mode Time Lapse record modeRecording Reservation record Weight value REC Duty recordAlarm weight value record REC DutyAlarm record Alarm occurrence conditionsAlarm release Alarm signal standardAlarm/Loss list reference Operation in video lossOperation in motion detection Appendix a Specifications Outside Drawing Ensure power cord is properly inserted Appendix B Checking points in trouble