1.Remove a screw on the upper hinge cover 1 . With the door open, disengage the two locking tabs with a
1
3
4
2
2.Removing the FIXER HINGE ,and next take off the upper hinge. Be careful that the door does not fall on you as you are removing it.
Be sure to keep track of all parts you are CAUTION removing.
3.Next, remove the door from the lower hinge 5 by carefully lifting the door straight up 6 .
6
5
Be careful not to pinch the water tubing and CAUTION wire harness on the door.
Reattaching the freezer doors
To reattach the freezer doors, replace parts in CAUTION reverse order.
When assembling / disassembling the freezer CAUTION door, be careful with the breakage of inter
Removing the Fridge Door
1.Remove a screw on the upper hinge cover 1 .
With the door open, disengage the two locking tabs with a
it while the lifting up the rear of the cover | 3 , and |
then disconnect the wires by gently pulling them | |
apart 4 . |
|
1 |
|
3 | 01 |
| 4 |
2 | SETTINGUP |
| |
2.Removing the FIXER HINGE ,and next take off the upper hinge. Be careful that the door does not fall on you as you are removing it.
Be sure to keep track of all parts you are
CAUTION removing.
3. Remove the door from the lower hinge 5 by lifting
6
the door straight up 6 . 
5
Reattaching the Fridge door
To reattach the fridge doors, replace parts in
CAUTION reverse order.
LEVELLING THE REFRIGERATOR
lock s/w on top of the door. It causes the malfunction of defrost. Make sure to remove the sponge with its tape, which covers the inter lock S/W after assembling.
inter lock s/w
Now that the doors are back on the refrigerator, you want to make sure the refrigerator is level so that you can make
final adjustments. If the refrigerator is not level, it will not be possible to get the doors perfectly even.
Cabinet Leg
Door Leg
setting up _09