Adding TCP/IP to Your Protocols List

35

The Select Network Protocol dialog box appears.

Figure 18 Select Network Protocol Dialog Box

4From the Manufacturers list box, select Microsoft, and then from the Network Protocols list box, select TCP/IP.

5Click OK to exit the Select Network Protocol Dialog box.

6Click OK again to exit the Network Dialog box. You may be prompted to re-boot your workstation.

7Run the EZ-LAN Wizard again to optimize the settings on your workstation.

Windows NT 4.0 To add TCP/IP to your protocols list for Windows NT 4.0:

You may need your Windows NT 4.0 installation CD-ROM.

1From the Control Panel, double-click Network. The Network dialog box appears.

Page 35
Image 35
3Com Dual 56K manual Select Network Protocol dialog box appears, You may need your Windows NT 4.0 installation CD-ROM