3Com Dual 56K manual Dial-in Users Parameters Screen

116CHAPTER 8: CONFIGURING THE DUAL 56K LAN MODEM FOR DIAL-IN SUPPORT

Figure 68 Dial-in Users Parameters Screen

3In the Name field, enter a unique name to designate this dial-in user.

4In the Password field, enter a password to verify access when this user dials into the LAN Modem.

5In the Type of Use field, select the scenario for which your dial-in situation applies:

■Choose Single-UserDial-inif this user will be accessing the LAN Modem from a regular analog modem or second analog LAN Modem on which attached workstations can share a single IP address using NAT.

■Choose LAN Modem Site-to-Siteif this user will be dialing in from another LAN Modem which is being configured as both a server-side and client-side device (for “peer-to-peer” networking).

■Choose Advanced if this user will be accessing the LAN Modem from a router other than a LAN Modem. This scenario requires that all IP addresses be statically configured, and should be configured by your MIS administrator.

6In the Idle Timer field, enter the length of inactivity before the LAN Modem drops the incoming call. By default this value is 900 seconds (15 minutes).