102CHAPTER 8: CONFIGURING THE DUAL 56K LAN MODEM FOR DIAL-IN SUPPORT
Once the LAN Modem has changed its IP address, you will no longer be able to access the configuration screens through your Web browser until you re-start your workstation and allow it to acquire a new IP address from the LAN Modem’s new subnet.
10If you chose Site B or C, re-start your workstation. This will allow your workstation to acquire an IP address as part of the LAN Modem’s new subnet.
This completes the Dial-in Global Parameters portion of the server-side configuration. Go on to “Creating a Dial-In User Profile Using the Dial-In Wizard.”
Creating a Dial-In User Before dialing into a LAN Modem, a dial-in user account must be created for every Profile Using the Dial-Inuser or remote site that requires access. To create a dial-in user profile on the
Wizard central LAN Modem using the Dial-in Wizard, refer to the appropriate application below for specific Dial-in Wizard instructions. For more detailed descriptions of these scenarios, refer to “Understanding the Three Dial-in Profile Types”.
■To create a Single User Dial-in,follow the steps under “Dial-in Wizard for Single User Dial-in,” page 102.
■To create a LAN Modem Site-to-SiteDial-in,follow the steps under “Dial-in Wizard for LAN Modem Site-to-SiteDial-in,” page 105.
■To create an Advanced Dial-in,follow the steps under “Dial-in Wizard for Advanced Dial-in,” page 108.
A Dial-in User Profile must be configured for each device that requires dial in access. In the case of a second LAN Modem, one Dial-in User Profile can be shared among all workstations attached to the remote LAN Modem.
Dial-in Wizard for Single User Dial-in
To create a Dial-in User Profile for a Single User Dial-in client device, follow these steps:
1From the LAN Modem Main Configuration Page, click the Dial-Inbutton
2Click the Dial-In Wizard button.
