3Com Dual 56K manual Placing a Call from a Client-side LAN Modem

118CHAPTER 8: CONFIGURING THE DUAL 56K LAN MODEM FOR DIAL-IN SUPPORT

Placing a Call from a Client-side LAN Modem

Once you have created a service provider profile on your client LAN Modem, you can place a call in one of three ways:

1Use the client LAN Modem’s Manual Call Control page to place a call manually.

2Use the LAN Modem Desktop Manager on a client workstation to place a call manually.

3Enter an IP address or domain name of a server attached to the remote LAN Modem, and place the call automatically. Note that this option assumes that you have configured a Private Network as your service provider, and not an ISP.

Once connected, you can use all LAN resources available on the server end of the connection. For further information, visit the LAN Modem’s Internet Homepage at http://www.3com.com/support/docs/lanmodem.