3Com Dual 56K manual Click Add Select Network Component Type dialog box appears

34CHAPTER 3: BEFORE YOU BEGIN

Adding TCP/IP to Your If you ran the EZ-LAN Wizard on your computer and found that TCP/IP was not

Protocols Listbound to your Ethernet adapter, follow the steps to add TCP/IP to your protocols list, according to your operating system:

Windows 95 and 98 To add TCP/IP to your protocols list for Windows 95 or 98:

You may be prompted for your Windows 95 or 98 installation disks or CD-ROM.

1From the Control Panel, double-click Network. The Network dialog box appears.

Figure 16 Network Dialog Box

2Click Add.

The Select Network Component Type dialog box appears.

Figure 17 Select Network Component Type Dialog Box

3Select Protocol and then click Add.