Samsung AR10NVFSCURNSV manual Timed on/Timed off function

Page 18

Energy-Saving Features

Timed on/Timed off function

Use the Timed on/Timed off to turn on or off the air conditioner after the time that you set.

(Select On or Off among On, Off, and .)

(Set the on/off time.)

Press the (Timer) button to change the current function between On, Off, and (good’sleep). (good’sleep) is displayed in the Cool mode only.

NOTE

You can set a time between 0.5 and 24 hours. Set the time interval to 0.0 to cancel the Timed on/off function.

Once you start the Timed on/off function, the Timer ( ) indicator is displayed on the indoor unit display.

After starting the Timed on function, you can change the mode and the set temperature. You cannot change the set temperature while the Fan mode is running.

You cannot set the same time for both of the Timed on and Timed off functions.

 

Combining Timed on and Timed off

 

 

When the air

Example) Timed on: 3 hours, Timed off: 5 hours

The air conditioner turns on after 3 hours from the

conditioner

moment you start Timed on/off, remains on for 2

is off

hours, then turns off automatically.

 

 

 

When the air

Example) Timed on: 3 hours, Timed off: 1 hour

The air conditioner turns off after1 hour from the

conditioner

moment you start Timed on/off, then turns on after 2

is on

hours from the moment it is turned off.

 

 

 

18English

Image 18
Contents Air conditioner Contents Correct disposal of batteries in this product Safety Information Failing to do so may result in electric shock or fireThis may result in electric shock or fire For Power Supply This may result in electric shock or burns Do not touch the circuit breakerwith wet handsThis may result in electric shock This may result in children seriously injuring themselvesDo not clean the inside of the air conditioner by yourself Do not operate the appliance with wet handsDo not drink the water from the air conditioner Indoor Unit Overview Timer indicatorOperation indicator DisplayRemote Control Overview Inserting batteriesRemote Control Operation Controlling temperatureOperation modes Controlling fan speed Controlling air flow directionHorizontal air flow manual Cool mode Cooling OperationStep cooling function Dry mode Dehumidifying OperationQuick Smart Features Auto modeFan mode Fast function Comfort functionQuiet function Beep sound functionEnergy-Saving Operation Cool mode When the Single user function starts,Button Cool mode Select Single user Single user functionTimed on/Timed off function Good’sleep function Cleaning duration Minutes Cleaning at a GlanceRunning Auto clean Do not clean the display by using alkaline detergentCleaning the filter Troubleshooting Check whether the drains are clean. Clean them regularly Problem Solution Timed on/offFunction does not work Setting the time Indicator blinks An error is indicatedInstallation of the unit General informationPower supply line, fuse, or circuit breaker Install the unit in a place where water can drain smoothlyChoosing the installation location Minimum clearances for the outdoor unitCases Unpacking Checking and preparing accessories and toolsAccessories Unpacking the indoor unitOptional accessories Accessories in the outdoor unit packageTools Taping the pipes, cables, and drain hose Drilling a hole through the wallIndoor Unit Installation Optional Extending the power cable Prepare the following toolsApply heat to the contraction tube to contract it Installing and connecting the drain hose Install the drain hoseOptional Extending the drain hose Optional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe Fixing the installation plate When fixing the indoor unit on a wallWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum board Fix the installation plate without inclining to one sideFixing the outdoor unit in place Outdoor Unit InstallationPipes Optional Fixing the outdoor unit to a wall with a rackEvacuating the air Adding refrigerant RefrigerantInstallation Inspection Running the Smart Install modePerforming the gas leak tests Off, Blinking, On LEDPress the Power button to stop the trial operation Performing final check and trial operationPumping down for removing the product English English Questions or COMMENTS?