Installation
Optional accessories
| Insulated assembly pipe, | |
Insulated assembly pipe, | Ø 9.52 mm (1) | |
Ø 6.35 mm (1) | **09******* | |
| **12******* | |
Insulated assembly pipe, | Insulated assembly pipe, | |
Ø 12.70 mm (1) | Ø 15.88 mm (1) | |
**18******* | **24******* | |
Drain Hose, 2 m long (1) | Pipe clamp A (3) | |
Pipe clamp B (3) | Vinyl tape (2) | |
Putty 100 g (1) | PE T3 foam tube | |
insulation (1) | ||
| ||
M4 x 25 tapped screw (6) | Cement nail (6) | |
**09******* | ||
**12******* | **24******* | |
**18******* |
| |
**24******* | **24******* |
Accessories in the outdoor unit package
Rubber leg (4)
NOTE
•A flare nut is attached to the end of each pipe of an evaporator or a service port. Use flare nuts when connecting the pipes.
•Wire assembly cables are optional. If they are not supplied, use standard cables.
•The drain plug and the rubber legs are included only when the air conditioner is supplied without assembly pipes.
•If these accessories are supplied, they are in the accessory package or outdoor unit package.
Tools
General tools
•Vacuum pump
(Backward flowing prevention)
•Manifold gauge
•Stud finder
•Torque wrench
•Pipe cutter
•Reamer
•Pipe bender
•Spirit level
•Screwdriver
•Spanner
•Drill
•
•Measuring tape
Tools for test operation
•Thermometer
•Resistance meter
•Electroscope
28English