Samsung AR10NVFSCURNSV manual Remote Control Operation, Operation modes, Controlling temperature

Page 10

At a Glance

Remote Control Operation

You can use the air conditioner easily by selecting a mode and then by controlling the temperature, fan speed, and air direction.

Operation modes

You can change the current mode between Auto, Cool, Dry and Fan by

pressing the button.

Controlling temperature

You can control the temperature in each mode as follows:

Mode	Temperature control

Auto/Cool	Adjust by 1 °C between 16 °C and 30 °C.

Dry	Adjust by 1 °C between 18 °C and 30 °C.

Fan	You cannot control the temperature.

NOTE

You can use the Cool and Dry modes in the following conditions:

Mode

Indoor temperature

Outdoor temperature

Indoor humidity

	Cool	Dry

	16 °C to 32 °C	18 °C to 32 °C

	16 °C to 46°C	16 °C to 46 °C

	80% or less relative	_
	humidity	_
	humidity

•If the air conditioner operates in a high humidity environment in the Cool mode for an extended period of time, condensation may occur.

10English

Image 10

Contents Air conditioner Contents Correct disposal of batteries in this product Failing to do so may result in electric shock or fire Safety InformationThis may result in electric shock or fire For Power Supply This may result in electric shock or burns Do not touch the circuit breakerwith wet handsThis may result in electric shock This may result in children seriously injuring themselvesDo not operate the appliance with wet hands Do not clean the inside of the air conditioner by yourselfDo not drink the water from the air conditioner Indoor Unit Overview Timer indicatorOperation indicator DisplayRemote Control Overview Inserting batteriesControlling temperature Remote Control OperationOperation modes Controlling air flow direction Controlling fan speedHorizontal air flow manual Cooling Operation Cool modeStep cooling function Dry mode Dehumidifying OperationAuto mode Quick Smart FeaturesFan mode Fast function Comfort functionQuiet function Beep sound functionEnergy-Saving Operation Cool mode When the Single user function starts,Button Cool mode Select Single user Single user functionTimed on/Timed off function Good’sleep function Cleaning duration Minutes Cleaning at a GlanceRunning Auto clean Do not clean the display by using alkaline detergentCleaning the filter Troubleshooting Check whether the drains are clean. Clean them regularly Problem Solution Timed on/offFunction does not work Setting the time Indicator blinks An error is indicatedInstallation of the unit General informationPower supply line, fuse, or circuit breaker Install the unit in a place where water can drain smoothlyMinimum clearances for the outdoor unit Choosing the installation locationCases Unpacking Checking and preparing accessories and toolsAccessories Unpacking the indoor unitAccessories in the outdoor unit package Optional accessoriesTools Taping the pipes, cables, and drain hose Drilling a hole through the wallIndoor Unit Installation Prepare the following tools Optional Extending the power cableApply heat to the contraction tube to contract it Install the drain hose Installing and connecting the drain hoseOptional Extending the drain hose Optional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe When fixing the indoor unit on a wall Fixing the installation plateWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum board Fix the installation plate without inclining to one sideFixing the outdoor unit in place Outdoor Unit InstallationPipes Optional Fixing the outdoor unit to a wall with a rackEvacuating the air Adding refrigerant RefrigerantRunning the Smart Install mode Installation InspectionPerforming the gas leak tests Off, Blinking, On LEDPerforming final check and trial operation Press the Power button to stop the trial operationPumping down for removing the product English English Questions or COMMENTS?