Samsung AR10NVFSCURNSV manual General information, Installation of the unit

Page 24

Safety Information on Installation

Installation

Carefully follow the precautions listed below because they are essential to guarantee the safety of both the air conditioner and the workers.

•Always disconnect the air conditioner from the power supply before servicing it or accessing its internal components.

•Verify that installation and testing operations are performed by qualified personnel.

•Verify that the air conditioner is not installed in an easily accessible area.

General information

•Carefully read the content of this manual before installing the air conditioner and store the manual in a safe place in order to be able to use it as reference after installation.

•For maximum safety, installers should always carefully read the following warnings.

•Store the operation and installation manual in a safe location and remember to hand it over to the new owner if the air conditioner is sold or transferred.

•This manual explains how to install an indoor unit with a split system with two SAMSUNG units. The use of other types of units with different control systems may damage the units and invalidate the warranty. The manufacturer shall not be responsible for damages arising from the use of non compliant units.

•The manufacturer shall not be responsible for damage originating from unauthorised changes or the improper connection of electric and requirements set forth in the “Operating limits” table, included in the manual, shall immediately invalidate the warranty.

•The air conditioner should be used only for the applications for which it has been designed: the indoor unit is not suitable to be installed in areas used for laundry.

•Do not use the units if damaged. If problems occur, switch the unit off and disconnect it from the power supply.

•In order to help prevent electric shocks, fires or injuries, always stop the unit, disable the protection switch and contact SAMSUNG’s technical support if the unit produces smoke, if the power cable is hot or damaged or if the unit is very noisy.

•Always remember to inspect the unit, electric connections, refrigerant tubes and protections regularly. These operations should be performed by qualified personnel only.

•The unit contains moving parts, which should always be kept out of the reach of children.

•Do not attempt to repair, move, alter or reinstall the unit. If performed by unauthorised personnel, these operations may cause electric shocks or fires.

•Do not place containers with liquids or other objects on the unit.

•All the materials used for the manufacture and packaging of the air conditioner are recyclable.

•The packing material and exhaust batteries of the remote control (optional) must be disposed of in accordance with current laws.

•The air conditioner contains a refrigerant that has to be disposed of as special waste. At the end of its life cycle, the air conditioner must be disposed of in authorised centres or returned to the retailer so that it can be disposed of correctly and safely.

Installation of the unit

•IMPORTANT: When installing the unit, always remember to connect first the refrigerant tubes, then the electrical lines. Always disassemble the electric lines before the refrigerant tubes.

•Upon receipt, inspect the product to verify that it has not been damaged during transport. If the product appears damaged, DO NOT INSTALL it and immediately report the damage to the carrier or retailer (if the installer or the authorised technician has collected the material from the retailer.)

•After completing the installation, always carry out a functional test and provide the instructions on how to operate the air conditioner to the user.

•Do not use the air conditioner in environments with hazardous substances or close to equipment that release free flames to avoid the occurrence of fires, explosions or injuries.

•Our units must be installed in compliance with the spaces indicated in the installation manual to ensure either accessibility from both sides or ability to perform routine maintenance and repairs. The units’ components must be accessible and that can be disassembled in conditions of complete safety either for people or things. For this reason, where it is not observed as indicated

24English

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Air conditioner Contents Correct disposal of batteries in this product Safety Information Failing to do so may result in electric shock or fireThis may result in electric shock or fire For Power Supply Do not touch the circuit breakerwith wet hands This may result in electric shockThis may result in electric shock or burns This may result in children seriously injuring themselvesDo not clean the inside of the air conditioner by yourself Do not operate the appliance with wet handsDo not drink the water from the air conditioner Timer indicator Operation indicatorIndoor Unit Overview DisplayRemote Control Overview Inserting batteriesRemote Control Operation Controlling temperatureOperation modes Controlling fan speed Controlling air flow directionHorizontal air flow manual Cool mode Cooling OperationStep cooling function Dry mode Dehumidifying OperationQuick Smart Features Auto modeFan mode Fast function Comfort functionQuiet function Beep sound functionCool mode When the Single user function starts, Button Cool mode Select Single userEnergy-Saving Operation Single user functionTimed on/Timed off function Good’sleep function Cleaning at a Glance Running Auto cleanCleaning duration Minutes Do not clean the display by using alkaline detergentCleaning the filter Troubleshooting Problem Solution Timed on/off Function does not work Setting the time Indicator blinksCheck whether the drains are clean. Clean them regularly An error is indicatedInstallation of the unit General informationPower supply line, fuse, or circuit breaker Install the unit in a place where water can drain smoothlyChoosing the installation location Minimum clearances for the outdoor unitCases Checking and preparing accessories and tools AccessoriesUnpacking Unpacking the indoor unitOptional accessories Accessories in the outdoor unit packageTools Taping the pipes, cables, and drain hose Drilling a hole through the wallIndoor Unit Installation Optional Extending the power cable Prepare the following toolsApply heat to the contraction tube to contract it Installing and connecting the drain hose Install the drain hoseOptional Extending the drain hose Optional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe Fixing the installation plate When fixing the indoor unit on a wallWhen fixing the indoor unit on a window frame When fixing the indoor unit on a gypsum board Fix the installation plate without inclining to one sideOutdoor Unit Installation PipesFixing the outdoor unit in place Optional Fixing the outdoor unit to a wall with a rackEvacuating the air Adding refrigerant RefrigerantInstallation Inspection Running the Smart Install modePerforming the gas leak tests Off, Blinking, On LEDPress the Power button to stop the trial operation Performing final check and trial operationPumping down for removing the product English English Questions or COMMENTS?
Top Page Image Contents