Samsung AR10NVFSCURNSV manual Good’sleep function

Page 19

good’sleep function

Use the good'sleep function to get a good sleep at night and to save energy. You can select this function in the Cool mode.

In the Cool mode ►	(Select	among	►
	On, Off, and .)

(Set the operation time.) ►

•Press the (Timer) button to change the current function between On, Off, and (good’sleep).

NOTE

•You can adjust the set temperature by 1 °C between 16 °C and 30 °C.

•The recommended and optimal set temperatures in the good’sleep function are as follows:

	Mode	Recommended set	Optimal set
	Mode	temperature	temperature
		temperature	temperature

	Cool	25 °C to 27 °C	26 °C

•Once you start the good’sleep function, the good’sleep() indicator appears on the indoor unit display.

•You can set the operation time to between 0.5 and 12 hours. Set the operation time to 0.0 to cancel the good’sleep function.

•The default operation time for the good’sleep function in the Cool mode is 8 hours. If the operation time is set to over 5 hours, the Wake up function begins 1 hour before the set time. The air conditioner stops automatically when the operation time expires.

•When the Timed on, Timed off, and good'sleep functions are overlapped, the air conditioner operates its timer with only the function that you have started most recently.

Energy-Saving Features

English 19

Image 19

Contents Air conditioner Contents Correct disposal of batteries in this product Failing to do so may result in electric shock or fire Safety InformationThis may result in electric shock or fire For Power Supply This may result in children seriously injuring themselves Do not touch the circuit breakerwith wet handsThis may result in electric shock This may result in electric shock or burnsDo not operate the appliance with wet hands Do not clean the inside of the air conditioner by yourselfDo not drink the water from the air conditioner Display Timer indicatorOperation indicator Indoor Unit OverviewInserting batteries Remote Control OverviewControlling temperature Remote Control OperationOperation modes Controlling air flow direction Controlling fan speedHorizontal air flow manual Cooling Operation Cool modeStep cooling function Dehumidifying Operation Dry modeAuto mode Quick Smart FeaturesFan mode Comfort function Fast functionBeep sound function Quiet functionSingle user function Cool mode When the Single user function starts,Button Cool mode Select Single user Energy-Saving OperationTimed on/Timed off function Good’sleep function Do not clean the display by using alkaline detergent Cleaning at a GlanceRunning Auto clean Cleaning duration MinutesCleaning the filter Troubleshooting An error is indicated Problem Solution Timed on/offFunction does not work Setting the time Indicator blinks Check whether the drains are clean. Clean them regularlyGeneral information Installation of the unitInstall the unit in a place where water can drain smoothly Power supply line, fuse, or circuit breakerMinimum clearances for the outdoor unit Choosing the installation locationCases Unpacking the indoor unit Checking and preparing accessories and toolsAccessories UnpackingAccessories in the outdoor unit package Optional accessoriesTools Drilling a hole through the wall Taping the pipes, cables, and drain hoseIndoor Unit Installation Prepare the following tools Optional Extending the power cableApply heat to the contraction tube to contract it Install the drain hose Installing and connecting the drain hoseOptional Extending the drain hose Optional Changing the direction of the drain hose Shortening or extending the refrigerant pipes assembly pipe When fixing the indoor unit on a wall Fixing the installation plateWhen fixing the indoor unit on a window frame Fix the installation plate without inclining to one side When fixing the indoor unit on a gypsum boardOptional Fixing the outdoor unit to a wall with a rack Outdoor Unit InstallationPipes Fixing the outdoor unit in placeEvacuating the air Refrigerant Adding refrigerantRunning the Smart Install mode Installation InspectionPerforming the gas leak tests LED Off, Blinking, OnPerforming final check and trial operation Press the Power button to stop the trial operationPumping down for removing the product English English Questions or COMMENTS?