Before you connect a USB device

<To pair to your TV>

To produce TV sound on your Soundbar via a Bluetooth connection, you need to pair your system to the Bluetooth compliant TV first. Once the pairing is established, the pairing information is recorded and kept and no further Bluetooth connection message will appear. Bring the Soundbar and the TV close together before pairing.

1.Turn on the Samsung TV and Soundbar.

•Set Add New Device in the TV's Soundconnect Setting menu to On.

2.When you change the mode of the Soundbar to TV, a message asking whether to proceed with Bluetooth pairing is displayed. "[Samsung] Soundbar" appears on the TV screen.

3.Select <Yes> on the TV screen. The pairing with the Soundbar will be completed.

•Once the pairing is established, when you change the Soundbar to the TV mode from other input modes, it will automatically connect to the TV.

•Changing the Soundbar from TV mode to any other mode will cancel the Soundconnect connection.

•If you want to cancel the existing pairing of the Soundbar to a TV and pair your Soundbar to a different TV.

-- Press the PLAY/PAUSE button on the Soundbar for 5 seconds in the TV input mode to cancel the existing pairing. You can now pair it to a different TV.

•In the Soundconnect mode, you can control the volume and mute using either the TV remote or the Soundbar remote.

▪▪ TV Soundconnect operation range

-- recommended pairing range: within 50cm.

-- recommended operation range: 5m

▪▪ If the distance between the Soundbar and Samsung TV is over 5m, the connection or the sound can be cut off. If this occurs, connect to the Bluetooth device again within the operational range.

▪▪ Make sure the Samsung TV's Soundconnect mode is on before you use this function. ▪▪ The PLAY, NEXT, PREV, PAUSE buttons will not work in the Soundconnect mode. ▪▪ Using the Bluetooth POWER On function

-- The Bluetooth POWER On function is available after you have successfully connected the Soundbar to a Bluetooth compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on or off will turn the Soundbar's power on and off as well.

-- Connect the TV to your Soundbar using the TV SoundConnect function.

-- Press the Bluetooth POWER button on the Soundbar remote. "BLUETOOTH POWER ON" appears on the Soundbar's display.

-- BLUETOOTH POWER ON : The Soundbar turns on and off when you turn the TV on or off.

-- BLUETOOTH POWER OFF : The Soundbar only turns off when you turn the TV off. -- This function is supported by some Samsung TVs released from 2013 on.

-- If the Soundbar is connected to a TV through TV SoundConnect, and you turn the Soundbar off by turning off the TV, the Bluetooth POWER On function will not turn the Soundbar on, even if you connect another Bluetooth device to it.

▪▪ The Soundconnect feature is supported by select models released from 2012. Check whether your TV

supports Soundconnect before you begin. (For more information, refer to the user's guide of your TV)

USB

ENG

● FUNCTIONS

1. Connect the USB device to the USB port on the side of the unit.

2. Press the () button on the side panel of the Soundbar repeatedly until USB appears.

3. USB appears on the display screen and then disappears.

•The Soundbar connection is complete.

•The Soundbar automatically turns off (Auto Power Off) if no USB device has been connected for more than 25 minutes.

Be aware of the following:

• If the file name of a folder on a USB device exceeds 10 characters, it is not displayed on the VFD.

• This product may not be compatible with certain types of USB storage media.

•The Soundbar supports the FAT16 and FAT32 file systems. -- The NTFS file system is not supported.