15 Appliance Setup
A. Remove the Packaging
Remove the shrink film, corrugated top cap, bottom cap and column protectors from the appliance. The appliance should look as shown in Figure 15.1.
C. Remove the Shipping Materials
Remove the shipping materials from inside or underneath the firebox.
Figure 15.1 Appliance Unwrapped
B. Remove Screen Package Assembly
•Grasp the top of the screen package and lift up to remove. See Figures 15.2 and 15.3.
Figure 15.2 Lift up on Screen Package
D. Removing Fixed Glass Assembly
WARNING! Risk of Asphyxiation! Handle fixed glass assembly with care. Inspect the gasket to ensure it is undamaged and inspect the glass for cracks, chips or scratches.
DO NOT:
•Strike, slam or scratch glass
•Operate fireplace with glass removed, cracked, broken or scratched.
Replace fixed glass assembly as a complete assembly.
•Remove screen.
•Pull the four (30/33/36 in. appliances) or seven (42 in. appliance) glass assembly latches out of the groove on the glass frame. Refer to Figure 15.4.
•Remove the glass assembly from the appliance.
Latches |
|
(both bottom |
|
and top) |
|
Glass |
|
Assembly |
|
Figure 15.4 | Glass Assembly |
E. Remove Top Log Pack
The top log pack is shipped inside the firebox. When you remove the glass, the log pack will come out also.
F. Remove Packing Material
• Remove packing material (Figure 15.5).
Figure 15.3 Remove Screen Package | Figure 15.5 Remove Lytherm Pieces |
60 | Heatilator • Novus NNXT • |