Desa NATURAL GAS LOG HEATER installation manual Floor Clearances

Page 12

Mantel Shelf

INSTALLING

Continued

 

12"

 

 

 

10"

 

 

 

8"

 

 

 

6"

 

 

 

2 1/2"

 

 

Minimum Non-

 

 

 

Combustible

 

 

 

Material

8"

12"

15"

 

 

Min.

 

 

Hood

Distances to

(GA6050, GA6052)

Underside of

 

 

Mantel

18"

Underside of

Mantel Shelf

All minimum distances are in inches

Log Sets

20" 18", 24",

& 30" Models

Top of Fireplace Opening

Figure 7 - Minimum Mantel Clearances When Using Hood

If your installation does not meet the above minimum clearances, you must:

operate the logs only with the flue damper open, OR

raise the mantel to an acceptable height, OR

remove the mantel.

Floor Clearances

A.If installing appliance on the floor level, you must maintain the minimum distance of 14" to combustibles (see Figure 8).

14"

Combustible Material

12

Min.

Non-Combustible

Material

Figure 8 - Minimum Fireplace Clearances If Installed at Floor Level

B.If combustible materials are less than 14" to the fireplace, you must install appliance at least 5" above the combustible flooring (see Figure 9).

Hearth

Combustible Material

5"

Min.

Figure 9 - Minimum Fireplace Clearances Above Combustible Flooring

101308

Image 12
Contents OWNER’S Operation and Installation Manual What to do if YOU Smell GASContents Safety Information Safety InformationLocal Codes Unpacking Product Features Safety DeviceProduct Identification OperationAIR for Combustion VentilationProviding Adequate Ventilation AIR for Combustion and Ventilation Determining AIR Flow for Heater LocationDetermining if You Have a Confined or Unconfined Space AIR for CombustionVentilation AIR Installing Check GAS TypeTo Combustible Materials LOG Sizing RequirementsAnces from floor, ceiling, and adjoining wall Minimum Wall and Ceiling Clearances see FigureAccessories, Minimum Non Combustible Material ClearancesInstalling For Vented Operation,Floor Clearances Installing Damper Clamp Accessory for Vented Operation Attaching Damper ClampInstalling Heater Base Assembly Installation Items NeededAttaching Flexible Gas Hose to Heater Gas Regulator Connecting to GAS Supply Installation Items NeededChecking GAS Connections Gas ConnectionPressure Testing Heater Gas Connections Test Pressures Equal To or Less Than 1/2 PsigInstalling Logs Installing Front LogFor Your Safety Read Before Lighting Operating HeaterOperating HeaterThermostat-Controlled Models Only Operating Heater Models Inspecting Burners Pilot Flame PatternFront Burner Flame Pattern Trouble Shooting ODS/PILOT and BurnersLogs Cleaning and Mainte TROUBLE- ShootingTrouble Gas leak. See Warning Optional PositioningSensing Bulb Optional Positioning Thermostat Sensing Bulb For Masonry Factory-built Metal FireplaceService ServiceTechnical HintsReplacement Parts Parts Under WarrantyParts Not Under Warranty Accessories Valve GA5010Hood GA6050 Hood GA6052Illustrated Parts Break Down Parts List Description QTYThermostat Controlled Models Parts List 101308 101308 Warranty Information Keep this Warranty