LOWERLOUVREBRACKETS&HINGESCREEN
15
A | B |
FIGURES 29
Using 6 screws, attach the lower louvre brackets and hinge screen as illustrated. Be sure to install the louvre brack- ets over the hinge screen.
GVFL INSTALLATION
B
C
HINGE
CLIP
S L O T
TA B
S L O T
UPPER LOUVRES
Insert the louvre tabs into the slots located at the top left and right corners of the unit.
LOWER LOUVRES
Insert the hinge clips into the slots located at the bottom left and right corners of the unit.
HOOD
BRACKET
SLOT
30LOUVRE
31LOWER LOUVRES (VALVE CONTROL DOOR)
TO INSTALL THE UP- PER LOUVRES: Insert the upper louvres into the slots on both brack- ets. Press the top flange of the hood into the four clips located along the top of the unit as shown.
TO INSTALL THE LOWER LOUVRE AS- SEMBLY: Attach each hinge to the firebox with 2 screws.
To remove the louvres, pull the back tabs of the clips forward, while pushing the louvre assem- bly back. Lift the clip.
HEAT SHIELD STAND-OFF
REMOVAL
HEAT | SHIELD |
|
L36 LOUVRE INSTALLATION
FIGURE 32 | A |
|
|
B
C
FIGURE 33 | STAND- |
| OFFS |
END HEAT SHIELD SHOWN
When using a
LOGO PLACEMENT
Remove the backing of the logo supplied and place on the screen cover, as indicated.
A CLIPS
FLANGE
C E N T R E
S L O T
HOOD
Attach the hood by pressing the top flange into the clips along the top of the louvre opening. Secure using a screw through the centre slot.
FIGURE 34