Majestic Appliances 360DVS3 Lava Rock and Ember Material Placement, Ember Material Pt. #51915

360 DVS Series Direct Vent Fireplaces

	Side of Fireplace	B122
B120	B125
		B126

B123	B124
		B121	LG320
Fig. 40 360DVS log placement.
B121	Side of Fireplace
	B123	B120

Venting Side

B122

B126 B125 LG321

Fig. 41 360DVS log placement.

Lava Rock and Ember Material Placement

Your log set contains Ember Material and two types of Lava Rocks. Set these materials in place after the logs have been installed.

Ember Material (Pt. #51915)

Remove ember material from the bag and separate it into small pieces, then scatter it over burner tiles in a random fashion. Do not pack down ember material; leave it in a ‘fluffy’ state.

Lava Rock (Pt. #10001454)

Remove lav rock material from packaging and spread it over ceramic floor panels outside log stack. Do not

place this lava rock material on burner tiles.

Flame & Temperature Adjustment

RN/ RP Models

For units equipped with ‘HI/LO’ valves the flame adjust- ment is accomplished by rotating the ‘HI/LO’ adjustment knob located near the center of the gas control valve.

(Fig. 42 and Fig. 43)

Turn
counterclockwise	LO	HI	Turn clockwise
to decrease			to increase
flame height			flame height

Fig. 42 Flame adjustment knob for Honeywell valve.

26 10006326