Majestic Appliances 360DVSR, 360DVSL, 360DVS3, 360DVS2 warranty Optional Top Vent Application

Page 12

360 DVS Series Direct Vent Fireplaces

FP1430

Fig. 8 Alternate switch location.

Optional Top Vent Application

This appliance is shipped as a rear vent unit. If the installation layout requires the unit to be a top vent con- figuration, the appliance can be converted by following the steps below.

When removing and refitting the plates and adapter, be sure the associated gasket is undamaged and refitted as required.

1.Remove the ten (10) screws securing the outer col- lar adapter to the fireplace body. (Fig. 9)

2.Set the collar aside, complete with the gasket.

NOTE: Do not damage the gasket, as the adapter and gasket must be refitted.

3.Remove the insulation material (exposed in Step 2) from the top of the unit. (Fig. 10) This material can be discarded; however, if the unit is converted back to rear-vent, a new piece of insulation material approved by CFM Corporation must be used for this purpose.

NOTE: When converting appliance to top vent, ensure the insulation material referred to in step 3 is completely removed.

4.Remove the 4 screws securing the flue cover plate to the top of the intake box and remove the cover and gasket. (Fig. 11)

5.Remove 4 screws securing the flue pipe to back of the intake box and remove pipe and gasket. (Fig. 11)

6.Secure the plate and gasket removed in step 4 over the flue opening in the back of the intake box. En- sure the gasket is in place and undamaged.

7.Install the flue pipe and gasket removed in step 5 over the flue opening in the top of the intake box.

8.Refit the outer collar adapter and gasket to the unit with the round collar on the top. Secure the adapter with the 10 screws removed in step 1.

12

Remove These Screws

Remove

These

Screws

Outer Collar Adapter

FP1431

Fig. 9 Remove screws from outer collar adapter.

Insulation Pad (Must be removed)

Flue

Pipe

 

FP1432

Fig. 10

Remove flue cover and pipe.

 

Flue Cover

 

Plate

 

Flue

 

Pipe

FP1433

 

Fig. 11

Flue pipe removal.

 

10006326

Image 12
Contents 360DVSL 360DVSR Table of Contents Installation & Operating Instructions Ansi Z21.88-2005 / CSA Vented Gas Fireplace HeatersPlease Review the Following Carefully Clear of ALL Obstructions Gas Equipment Venting System not ProvidedFireplace Dimensions 360DVS2 Rear Vent ConfigurationTop Vent Configuration Fireplace Dimensions 360DVS3 / 306DVSL / 360DVSR Framing Dimensions 360DVS2 Rear VentConfiguration Rear Vent Configuration Top Vent ConfigurationFraming Dimensions 360DVS3 / 360DVSL / 360DVSR Rear Vent ConfirationRear Vent Configuration Top Vent Configuration Model 360DVS3 360DVSL/RLocating Your Fireplace Clearance to CombustiblesMantels Gas Line Installation HearthFraming & Finishing Final FinishingRemote ON/OFF Switch Installation Alternate Switch LocationEB-1 Electrical Junction Box Connection Optional Top Vent Application Remove screws from outer collar adapterGeneral Venting Electronic Gas Control ValveThere must not be any obstruction such as bushes Location of Vent TerminationCanadian Installations1 US Installations2 General Venting Information Termination LocationCanadian Installations USA InstallationsGeneral Information Assembling Vent Pipes Twist Lock PipesHow to Use the Vent Graph Rear Wall InstallationRear Wall Application StepVertical Sidewall Application Vent Opening for Noncombustible WallVertical Side Wall Installation Zero clearance sleeve is required only for combustible wallsAlways install horizontal venting on a level plane Vertical height requirementBelow Grade Installation Horizontal runs if the vertical exceeds 24 610 mmMaximum termination to roof clearance Vertical Through-the-Roof Installation Chimney supportTwist Lock Venting Components Window Frame Assembly Removal Front Window Frame AssemblyOperating Instructions Glass InformationGlass Cleaning Ceramic Refractory InstallationLog Installation Lava Rock and Ember Material Placement Flame & Temperature AdjustmentEmber Material Pt. #51915 Place this lava rock material on burner tilesFlame Characteristics Flame adjustment knob for SIT valveLighting and Operating Instructions Lighting InstructionsTo Turn OFF Gas to Heater What to do if YOU Smell GASTurning Off the Gas to the Appliance Troubleshooting the Gas Control System SIT Nova 820 Millivolt ValveSIT 822 Valve with a Honeywell Electronic Igniter Troubleshooting Honeywell VS8421 StartYES CheckFuel Conversion Instructions SIT Top Convertible PilotPSE Pilot SIT 820 Nova Gas Control Valve FigHoneywell conversion screw replacement Honeywell Gas Control Valve FigMaintenance Cleaning Standing Pilot Control SystemCleaning Electronic Ignition System Burner and Burner Compartment360DVS Series 360DVSL 360DVSR DVS Series Direct Vent Fireplaces Optional Accessories Fan KitsRemote Controls Wiring InstructionsDecorative Trim Frame Kit Model Functions Controlled360DVS Series Direct Vent Fireplaces DVS Series Direct Vent Fireplaces Product Covered by this Warranty If Warranty Service is NEEDED…Efficiency Ratings AFUE%

360DVS3, 360DVS2, 360DVSR, 360DVSL specifications

Majestic Appliances has been a leader in the home appliance industry, and their latest creations, the 360DVSL, 360DVS2, 360DVS3, and 360DVSR, exhibit the company's commitment to innovation, quality, and user convenience. These models are built with cutting-edge technology and unique features designed to enhance the cooking experience.

The Majestic 360DVSL is known for its sleek design and advanced cooking capabilities. One of its standout features is the dual-fuel capability, which combines the benefits of both gas and electric cooking. This allows for precise temperature control while retaining the intense heat that gas provides. The 360DVSL also features a large oven capacity, making it particularly useful for families and those who love to entertain. The self-cleaning function simplifies maintenance, allowing users to spend more time cooking and less time cleaning.

The 360DVS2 model takes efficiency to the next level with its smart technology integration. It comes equipped with Wi-Fi connectivity, enabling users to control the oven remotely via a smartphone app. This feature not only allows for pre-heating but also for monitoring cooking progress from anywhere in the house. Additionally, the 360DVS2 includes a convection oven that distributes heat evenly, ensuring perfect baking every time.

Meanwhile, the 360DVS3 model caters to culinary enthusiasts with its professional-grade features, including high BTU burners that can achieve rapid boiling and simmering. This model’s heavy-duty construction means it can withstand heavy use, making it ideal for serious cooks. The integrated griddle and customizable burner configurations provide maximum flexibility for diverse cooking needs.

Lastly, the 360DVSR is designed with safety and usability in mind. It features a child lock function and advanced flame failure safety systems, providing peace of mind for households with children. Moreover, the ergonomic knobs and touch controls enhance usability, allowing precise adjustments even when hands are busy.

Overall, the Majestic Appliances range of 360DVSL, 360DVS2, 360DVS3, and 360DVSR offers a comprehensive selection tailored to meet a variety of cooking needs. Each model is imbued with the spirit of innovation, quality craftsmanship, and attention to detail that Majestic is known for, making them excellent choices for anyone looking to upgrade their kitchen appliances.