Majestic Appliances 360DVSR Clear of ALL Obstructions, Gas Equipment Venting System not Provided

Page 4

360 DVS Series Direct Vent Fireplaces

Requirements for the Commonwealth of Massachusetts

All gas fitting and installation of this heater shall only be done by a licensed gas fitter or licensed plumber.

For all side wall horizontally vented gas fueled equipment installed in every dwelling, building or structure used in whole or in part for residential purposes, including those owned or operated by the Commonwealth and where the side wall exhaust vent termination is less than seven (7) feet above finished grade in the area of the venting, including but not limited to decks and porches, the following requirements shall be satisfied:

Installation of Carbon Monoxide Detectors

At the time of installation of the side wall horizontal vented gas fueled equipment, the installing plumber or gas fitter shall observe that a hard wired carbon monoxide detector with an alarm is installed on each additional level of the dwelling, building or structure served by the side wall horizontal vented gas fueled equipment. It shall be the responsibility of the property owner to secure the services of qualified licensed professionals for the installation of hard wired carbon monoxide detectors.

In the event that the side wall horizontally vented gas fueled equipment is installed in a crawl space or an attic, the hard wired carbon monoxide detector with alarm and battery back-up may be installed on the next adjacent floor level.

In the event that the requirements of this subdivision can not be met at the time of completion of installation, the owner shall have a period of thirty (30) days

to comply with the above requirements; provided, however, that during said thirty (30) day period, a battery operated carbon monoxide detector with an alarm shall be installed.

Approved Carbon Monoxide Detectors

Each carbon monoxide detector as required in accordance with the above provisions shall comply with NFPA 720 and ANSI/UL 2034 listed and IAS certified.

Signage

A metal or plastic identification plate shall be permanently mounted to the exterior of the building at a minimum height of eight (8) feet above grade directly in line with the exhaust vent terminal for the horizontally vented gas fueled heating appliance or equipment. The sign shall read, in print size no less than one-half (1/2) inch in size, “GAS VENT DIRECTLY BELOW, KEEP

CLEAR OF ALL OBSTRUCTIONS”.

Inspection

The state or local gas inspector of the side wall horizontally vented gas fueled equipment shall not approve the installation unless, upon inspection, the inspector observes carbon monoxide detectors and signage installed in accordance with the provisions of 248 CMR 5.08(2)(a)1 through 4.

Exemptions

The following equipment is exempt from 248 CMR 5.08(2)(a)1 through 4:

The equipment listed in Chapter 10 entitled “Equipment Not Required To Be Vented” in the most current edition of NFPA 54 as adopted by the Board; and

Product Approved side wall horizontally vented gas fueled equipment installed in a room or structure separate from the dwelling, building or structure used in whole or in part for residential purposes.

MANUFACTURER REQUIREMENTS

Gas Equipment Venting System Provided

When the manufacturer of Product Approved side wall horizontally vented gas equipment provides a venting system design or venting system components with the equipment, the instructions provided by the manufacturer for installation of the equipment and the venting system shall include:

Detailed instructions for the installation of the venting system design or the venting system components; and

A complete parts list for the venting system design or venting system.

Gas Equipment Venting System NOT Provided

When the manufacturer of a Product Approved side wall horizontally vented gas fueled equipment does not provide the parts for venting the flue gases, but identifies “special venting systems”, the following requirements shall be satisfied by the manufacturer:

The referenced “special venting system” instructions shall be included with the appliance or equipment installation instructions; and

The “special venting systems” shall be Product Approved by the Board, and the instructions for that system shall include a parts list and detailed installation instructions.

A copy of all installation instructions for all Product Approved side wall horizontally vented gas fueled equipment, all venting instructions, all parts lists for venting instructions, and/or all venting design instructions shall remain with the appliance or equipment at the completion of the installation.

4

10006326

Image 4
Contents 360DVSL 360DVSR Table of Contents Ansi Z21.88-2005 / CSA Vented Gas Fireplace Heaters Installation & Operating InstructionsPlease Review the Following Carefully Clear of ALL Obstructions Gas Equipment Venting System not ProvidedRear Vent Configuration Fireplace Dimensions 360DVS2Top Vent Configuration Fireplace Dimensions 360DVS3 / 306DVSL / 360DVSR Framing Dimensions 360DVS2 Rear VentConfiguration Rear Vent Configuration Top Vent ConfigurationFraming Dimensions 360DVS3 / 360DVSL / 360DVSR Rear Vent ConfirationRear Vent Configuration Top Vent Configuration Model 360DVS3 360DVSL/RClearance to Combustibles Locating Your FireplaceMantels Gas Line Installation HearthFraming & Finishing Final FinishingAlternate Switch Location Remote ON/OFF Switch InstallationEB-1 Electrical Junction Box Connection Optional Top Vent Application Remove screws from outer collar adapterGeneral Venting Electronic Gas Control ValveThere must not be any obstruction such as bushes Location of Vent TerminationCanadian Installations1 US Installations2 General Venting Information Termination LocationCanadian Installations USA InstallationsGeneral Information Assembling Vent Pipes Twist Lock PipesHow to Use the Vent Graph Rear Wall InstallationRear Wall Application StepVertical Sidewall Application Vent Opening for Noncombustible WallVertical Side Wall Installation Zero clearance sleeve is required only for combustible wallsAlways install horizontal venting on a level plane Vertical height requirementBelow Grade Installation Horizontal runs if the vertical exceeds 24 610 mmMaximum termination to roof clearance Vertical Through-the-Roof Installation Chimney supportTwist Lock Venting Components Window Frame Assembly Removal Front Window Frame AssemblyOperating Instructions Glass InformationCeramic Refractory Installation Glass CleaningLog Installation Lava Rock and Ember Material Placement Flame & Temperature AdjustmentEmber Material Pt. #51915 Place this lava rock material on burner tilesFlame Characteristics Flame adjustment knob for SIT valveLighting and Operating Instructions Lighting InstructionsTo Turn OFF Gas to Heater What to do if YOU Smell GASTurning Off the Gas to the Appliance Troubleshooting the Gas Control System SIT Nova 820 Millivolt ValveSIT 822 Valve with a Honeywell Electronic Igniter Troubleshooting Honeywell VS8421 StartYES CheckFuel Conversion Instructions SIT Top Convertible PilotPSE Pilot SIT 820 Nova Gas Control Valve FigHoneywell conversion screw replacement Honeywell Gas Control Valve FigMaintenance Cleaning Standing Pilot Control SystemCleaning Electronic Ignition System Burner and Burner Compartment360DVS Series 360DVSL 360DVSR DVS Series Direct Vent Fireplaces Optional Accessories Fan KitsRemote Controls Wiring InstructionsDecorative Trim Frame Kit Model Functions Controlled360DVS Series Direct Vent Fireplaces DVS Series Direct Vent Fireplaces Product Covered by this Warranty If Warranty Service is NEEDED…Efficiency Ratings AFUE%

360DVS3, 360DVS2, 360DVSR, 360DVSL specifications

Majestic Appliances has been a leader in the home appliance industry, and their latest creations, the 360DVSL, 360DVS2, 360DVS3, and 360DVSR, exhibit the company's commitment to innovation, quality, and user convenience. These models are built with cutting-edge technology and unique features designed to enhance the cooking experience.

The Majestic 360DVSL is known for its sleek design and advanced cooking capabilities. One of its standout features is the dual-fuel capability, which combines the benefits of both gas and electric cooking. This allows for precise temperature control while retaining the intense heat that gas provides. The 360DVSL also features a large oven capacity, making it particularly useful for families and those who love to entertain. The self-cleaning function simplifies maintenance, allowing users to spend more time cooking and less time cleaning.

The 360DVS2 model takes efficiency to the next level with its smart technology integration. It comes equipped with Wi-Fi connectivity, enabling users to control the oven remotely via a smartphone app. This feature not only allows for pre-heating but also for monitoring cooking progress from anywhere in the house. Additionally, the 360DVS2 includes a convection oven that distributes heat evenly, ensuring perfect baking every time.

Meanwhile, the 360DVS3 model caters to culinary enthusiasts with its professional-grade features, including high BTU burners that can achieve rapid boiling and simmering. This model’s heavy-duty construction means it can withstand heavy use, making it ideal for serious cooks. The integrated griddle and customizable burner configurations provide maximum flexibility for diverse cooking needs.

Lastly, the 360DVSR is designed with safety and usability in mind. It features a child lock function and advanced flame failure safety systems, providing peace of mind for households with children. Moreover, the ergonomic knobs and touch controls enhance usability, allowing precise adjustments even when hands are busy.

Overall, the Majestic Appliances range of 360DVSL, 360DVS2, 360DVS3, and 360DVSR offers a comprehensive selection tailored to meet a variety of cooking needs. Each model is imbued with the spirit of innovation, quality craftsmanship, and attention to detail that Majestic is known for, making them excellent choices for anyone looking to upgrade their kitchen appliances.