
All installations and services must be performed by qualified service personnel.
II.GENERAL INSTRUCTIONS AND CLEARANCES NOTE: READ THIS SECTION BEFORE STARTING INSTALLATION
1.This furnace is equipped with orifices for operation with natural gas. For conversion to propane gas, see instructions in Gas Conversion Section of this manual.
2.Any reference to L.P. or Propane gas in this manual, any other labels, or markings on this furnace is to be construed to be propane
3.The selection of a furnace heating capacity for a proposed installation should be based on a heat loss calculation made according to the manuals provided by the Air Conditioning Contractors of America (ACCA) or the American Society of Heating, Refrigeration and Air Conditioning Engineers, Inc. (ASHRAE).
4.The installer shall be familiar with and comply with all codes and regulations applicable to the installation of these heating appliances and related equipment. In lieu of local codes, the installation shall be in accordance with the current provisions of one or more of the following standards.
a.Federal Manufactured Home Constructions & Safety Standard (HUD Total 24, Part 280).
b.American National Standard
c.American National Standard
d.American National Standard Electric Code
The
: The area around the furnace must be kept free and clear of combustible materials, especially papers and rags.
: This furnace is not to be used as a construction heater.
6