Honeywell LYNXR-2 manual Auto Stay Feature, Arming the System with No Delay, Quick Arming

Page 17

SECURING THE PREMISES

Arming the System

Auto Stay Feature

If this feature is enabled by installer, the LYNXR-2SIA, when armed AWAY from the control’s keypad or a Wireless Keypad, switches to the STAY mode if the Exit Time expires and no exit has been made.

NOTE: If the exit route entry/exit sensor is in a check condition or has been bypassed it will result in a loss of interior protection because the alarm system will arm STAY in this case. Consult with your installer for servicing of the entry exit zones or to turn off this feature if a check condition on entry exit zones occurs.

Arming the System with No Delay

Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the entrance door.

Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as vacations, etc.

When armed with NO DELAY, the system will sound an alarm if a protected door or window is opened, including the entrance door. You may leave through the entrance door during the exit delay period without causing an alarm, but an alarm will sound as soon as someone reenters.

To arm with NO DELAY:

Your user code**

+ AWAY or STAY

+

NO DELAY

** See Quick Arming paragraph.

Quick Arming

If Quick Arm was programmed by the installer, you do not need to enter the security code to arm the system. Instead, simply press and hold down the desired arming key for at least 2 seconds. The security code must always be used to disarm the system, however.

To arm if Quick Arm is active:

AWAY or STAY hold down for at least 2 seconds

To arm with NO DELAY if Quick Arm is active:

least 2 seconds

AWAY or STAY then NO DELAY hold down for at

IMPORTANT: The Babysitter Code and Installer Code cannot disarm the system unless it was used to arm the system. In addition, if the system is armed by pressing and holding the Quick-Arm buttons, neither the Babysitter Code nor Installer Code can disarm the system.

– 17 –

Image 17
Contents LYNXR-2 Series Security System Page Table of Contents Page System Overview FeaturesLYNXR-2SIA False Alarm Prevention Features General Operation Two-Way Voice Feature Quick View of System Functions To turn Test mode off To turn Test mode onTo remotely activate X10 devices To remotely activate X10 devices 07General About the Master Keypad2ARMED 3READY Master Keypad DefinitionsLights on / Lights OFF Keys Turns LED Meanings About the Display and IndicatorsChecking System Status Securing the PremisesArming In Away Mode Arming in Stay ModeRestarting Exit Delay While System Armed Exit Delay Restart/ResetArming the System with No Delay Auto Stay FeatureTo arm with no Delay if Quick Arm is active Quick ArmingExit Delay Entry/Exit DelaysEntry Delay LYNXR-2SIA Exit/Entry Delay TimesDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Bypassing Individual Zones Bypassing Protection ZonesForced Bypass Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode User Functions Paging FeatureAutomatic Paging Code FormatFollow Me Reminder and System Announcements Follow Me Announcement FeatureSystem Announcements Reminder AnnouncementsTo delete Follow Me reminder telephone number To program Follow Me reminder telephone numberTo deactivate X10 devices 07 Device DescriptionsRecording a Message Message Recording/Playback/Volume ControlMessage Playback Deleting MessagesTo restore announcement sounding Function + Adjusting the VolumeTo adjust message playback/system announcement volume Performing the AUX function AUX FunctionDefining the AUX Function Hour Clock/CalendarMinute MonthYear DayScheduling User Interface Schedule number = the value that was last stored in the memoryEnd Time minute Entry Event Comment Event Identifier EntriesEntry Day Day of Week EntriesEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely Bypass zones Remote Phone Control Commands To remotely disarm systemTo remotely arm in Away mode Using the Speaker Phone Feature Speaker Phone FeatureEntering # + Remote Services Case of Fire Silencing a Fire AlarmGeneral Information Living Room Bedroom Fire Alarm SystemEmergency Evacuation To Add/Delete a User or Change a Users Code System FunctionsSecurity Codes Exit Test Mode Testing the System to be conducted weeklyEntering Test Mode Routine Care Trouble MessagesTypical Trouble Condition Displays Maintaining your system Low Battery Conditions in Wireless SensorsChanging the LYNXR-2 Series System Battery Sound Cause Display Announcement Summary of Audible NotificationAdditional Announcements Industry Canada Federal Communications Commission FCC Part 15 StatementRinger Equivalence Number Notice Federal Communications Commission FCC PartEvent of Telephone Operational Problems Servicing Information Page Notifies Insert B = Burglary, F = Fire Owners Insurance Premium Credit RequestOwners Insurance Premium Credit Request Limitations of this Alarm System Page Page Page Index No delay Pager ONE Year Limited Warranty ÊK15012yŠ

LYNXR-2 specifications

The Honeywell LYNXR-2 is an advanced wireless security system designed for residential and light commercial applications. Recognized for its user-friendly interface, the LYNXR-2 combines cutting-edge technology with essential security features, making it a popular choice among homeowners seeking peace of mind.

One of the primary characteristics of the LYNXR-2 is its sleek, modern design, which includes a large, easy-to-read touchscreen display. This intuitive interface allows users to manage their security system with minimal effort. From arming and disarming the system to viewing alerts, the touchscreen simplifies the interaction for users of all ages.

The LYNXR-2 employs Honeywell’s innovative technology, which integrates both security and home automation functionalities. This powerful system supports a wide range of wireless sensors, including door/window contacts, motion detectors, and smoke detectors. The flexibility of wireless technology means users can easily expand their security coverage without the need for complicated wiring.

Another notable feature of the LYNXR-2 is its built-in Z-Wave technology. This allows for seamless integration with smart home devices, enabling users to control lights, locks, and thermostats through the same interface. Home automation capabilities enhance security further by allowing users to program their system to perform specific actions, such as turning on lights when entering a home.

The LYNXR-2 system also offers robust communication features. It comes equipped with a cellular backup, ensuring that users remain connected to monitoring services even during power outages or if the phone line is cut. Additionally, the system supports both IP and cellular connectivity, providing flexibility in how users choose to connect their systems to monitoring services.

For those looking for added functionality, the LYNXR-2 can be easily integrated with Honeywell’s Total Connect Remote Services. This allows users to monitor and control their security system remotely through a smartphone or tablet, providing real-time notifications and updates on system status.

In summary, the Honeywell LYNXR-2 stands out for its combination of user-friendly features, advanced technologies, and extensive security and automation capabilities. It is an ideal solution for individuals seeking a reliable, scalable, and easy-to-use security system for their homes or light commercial properties. With its comprehensive features and seamless integration, the LYNXR-2 is poised to meet the security needs of modern living.