Honeywell LYNXR-2 System Functions, Security Codes, To Add/Delete a User or Change a Users Code

Page 44

SYSTEM FUNCTIONS

Security Codes

General Information

For additional security you (the Master User Code) can assign secondary user codes to individual users enabling them to perform specific system functions. These secondary users are identified by "user numbers" when their codes are assigned. You can assign up to 6 user codes (2-digit user numbers 03- 08). Note that the master user is the only one who can assign codes to secondary users, and is designated user no. 02; user no. 01 is the Installer’s code.

All codes can be used interchangeably when performing system functions (a system armed with one user's code can be disarmed by another user's code), with the exception of the Babysitter Code described below.

Babysitter Code (User 07): This code can be used to arm the system, but cannot disarm the system unless the system was armed with this code. This code is typically assigned to someone (such as a babysitter) who needs to arm/disarm the system only at certain times. The Babysitter Code is assigned to User 07.

Duress Code (User 08): This feature is intended for use when you are forced to disarm or arm the system under threat. When used, the system will act normally, but can silently notify the alarm monitoring company of your situation, if that service has been provided. Duress Code is assigned to User 08.

The Duress Code is useful only when the system is connected to an alarm monitoring company.

To Add/Delete a User or Change a User's Code

Changing the Master User Code

Follow the procedure for changing a user's code, but enter User No. 02 and enter the new code twice.

IMPORTANT: Temporary users of the system (e.g., babysitters, cleaning staff) should not be shown how to use any system function they do not need to know, such as bypassing protection zones for example.

Sequential key depressions for all steps in a procedure must be made within 2 seconds of one another, or else the entire entry is aborted and must be repeated from its beginning.

LYNXR-2SIA False Alarm Prevention Feature

The system prevents User Codes (including the duress code) from being duplicated. If you have attempted to assign a duplicate 4 digit code, 4 beeps will sound and the entry is rejected. Any previous existing code will remain unchanged. Choose a different new 4 digit code and repeat the procedure.

Add a user code:

+ CODE Key + user number (03-08) + user’s code Master user code

Delete a user code:

+ CODE Key + user number (03-08) Master user code

Wait (about 3 seconds) until the keypad beeps once before pressing any other key. The code is automatically deleted.

– 44 –

Page 43 Page 45
Image 44
Page 43 Page 45
Contents LYNXR-2 Series Security System Page Table of Contents Page Features System OverviewLYNXR-2SIA False Alarm Prevention Features General Operation Two-Way Voice Feature Quick View of System Functions To turn Test mode on To turn Test mode offTo remotely activate X10 devices To remotely activate X10 devices 07About the Master Keypad GeneralMaster Keypad Definitions 2ARMED 3READYLights on / Lights OFF Keys Turns About the Display and Indicators LED MeaningsSecuring the Premises Checking System StatusArming in Stay Mode Arming In Away ModeRestarting Exit Delay While System Armed Exit Delay Restart/ResetAuto Stay Feature Arming the System with No DelayTo arm with no Delay if Quick Arm is active Quick ArmingEntry/Exit Delays Exit DelayEntry Delay LYNXR-2SIA Exit/Entry Delay TimesDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Bypassing Protection Zones Bypassing Individual ZonesForced Bypass Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode Paging Feature User FunctionsAutomatic Paging Code FormatFollow Me Announcement Feature Follow Me Reminder and System AnnouncementsSystem Announcements Reminder AnnouncementsTo program Follow Me reminder telephone number To delete Follow Me reminder telephone numberDevice Descriptions To deactivate X10 devices 07Message Recording/Playback/Volume Control Recording a MessageMessage Playback Deleting MessagesTo restore announcement sounding Function + Adjusting the VolumeTo adjust message playback/system announcement volume Performing the AUX function AUX FunctionDefining the AUX Function Clock/Calendar HourMinute MonthDay YearScheduling User Interface = the value that was last stored in the memory Schedule numberEnd Time minute Event Identifier Entries Entry Event CommentDay of Week Entries Entry DayEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely Bypass zones Remote Phone Control Commands To remotely disarm systemTo remotely arm in Away mode Speaker Phone Feature Using the Speaker Phone FeatureEntering # + Remote Services Case of Fire Silencing a Fire AlarmGeneral Information Fire Alarm System Living Room BedroomEmergency Evacuation To Add/Delete a User or Change a Users Code System FunctionsSecurity Codes Exit Test Mode Testing the System to be conducted weeklyEntering Test Mode Routine Care Trouble MessagesTypical Trouble Condition Displays Maintaining your system Low Battery Conditions in Wireless SensorsChanging the LYNXR-2 Series System Battery Summary of Audible Notification Sound Cause Display AnnouncementAdditional Announcements Federal Communications Commission FCC Part 15 Statement Industry CanadaFederal Communications Commission FCC Part Ringer Equivalence Number NoticeEvent of Telephone Operational Problems Servicing Information Page Owners Insurance Premium Credit Request Notifies Insert B = Burglary, F = FireOwners Insurance Premium Credit Request Limitations of this Alarm System Page Page Page Index No delay Pager ONE Year Limited Warranty ÊK15012yŠ

LYNXR-2 specifications

The Honeywell LYNXR-2 is an advanced wireless security system designed for residential and light commercial applications. Recognized for its user-friendly interface, the LYNXR-2 combines cutting-edge technology with essential security features, making it a popular choice among homeowners seeking peace of mind.

One of the primary characteristics of the LYNXR-2 is its sleek, modern design, which includes a large, easy-to-read touchscreen display. This intuitive interface allows users to manage their security system with minimal effort. From arming and disarming the system to viewing alerts, the touchscreen simplifies the interaction for users of all ages.

The LYNXR-2 employs Honeywell’s innovative technology, which integrates both security and home automation functionalities. This powerful system supports a wide range of wireless sensors, including door/window contacts, motion detectors, and smoke detectors. The flexibility of wireless technology means users can easily expand their security coverage without the need for complicated wiring.

Another notable feature of the LYNXR-2 is its built-in Z-Wave technology. This allows for seamless integration with smart home devices, enabling users to control lights, locks, and thermostats through the same interface. Home automation capabilities enhance security further by allowing users to program their system to perform specific actions, such as turning on lights when entering a home.

The LYNXR-2 system also offers robust communication features. It comes equipped with a cellular backup, ensuring that users remain connected to monitoring services even during power outages or if the phone line is cut. Additionally, the system supports both IP and cellular connectivity, providing flexibility in how users choose to connect their systems to monitoring services.

For those looking for added functionality, the LYNXR-2 can be easily integrated with Honeywell’s Total Connect Remote Services. This allows users to monitor and control their security system remotely through a smartphone or tablet, providing real-time notifications and updates on system status.

In summary, the Honeywell LYNXR-2 stands out for its combination of user-friendly features, advanced technologies, and extensive security and automation capabilities. It is an ideal solution for individuals seeking a reliable, scalable, and easy-to-use security system for their homes or light commercial properties. With its comprehensive features and seamless integration, the LYNXR-2 is poised to meet the security needs of modern living.
Top Page Image Contents