Honeywell LYNXR-2 manual Event Identifier Entries, Entry Event Comment

Page 34

USER FUNCTIONS

Scheduling User Interface

Event Identifier Entries

Note: On systems that are is equipped with a Wireless keypad, reminder announcements and the alarm clock will only be broadcast locally by the LYNXR-2 Series keypad.

Entry

Event

Comment

0

Empty

No event scheduled (or schedule is temporarily disabled)

 

 

 

1

X10 Device

Turn an X10 device, either on or off at begin/end times. (will

 

 

have a start and end time to program) (time driven)

 

 

NOTE: SH10A siren cannot be used.

 

 

 

2

Latch Key Report

Send a special pager report (7110000) indicating system not

 

 

yet disarmed. (will have a start/end time to send the report)

 

 

(window driven), (reports only to pager)

 

 

NOTE: Option *49 must be programmed to be 6 or higher.

 

 

Make sure unit is armed prior to start of window time.

 

 

In addition a secondary phone number must be

 

 

programmed in Option *42.

 

 

 

3

Automatic Stay Arming

Will arm the system automatically, and bypass any open

 

OR

zones, at a given time. It will send a report to the pager and

 

Scheduled Stay Arming

central station, indicating system has been auto armed stay,

 

(LYNXR-2SIA)

plus all bypass reports. (will have only a start time to send the

 

 

report) (time driven)

 

 

NOTES: (1) Prior executing auto stay arming or scheduled

 

 

stay arming, force bypass will be executed - if

 

 

option *23 was enabled.

 

 

(2) If pager report is required, Option *49 must be

 

 

programmed to be 6 or higher.

 

 

 

4

Reminder Announcements

Will announce the message recorded by your installer. This

 

 

will be repeated every minute until a key is depressed, or a

 

 

button type zone does an arm or disarm. †

 

 

NOTE: Make sure installer programmed the message at the

 

 

time of installation.

 

 

 

5

Alarm Clock

Will start a trouble tone (beep) on the speaker, which will

 

 

continue until a key is depressed. †

 

 

Figure 1.

– 34 –

Page 33 Page 35
Image 34
Page 33 Page 35
Contents LYNXR-2 Series Security System Page Table of Contents Page Features System OverviewLYNXR-2SIA False Alarm Prevention Features General Operation Two-Way Voice Feature Quick View of System Functions To remotely activate X10 devices To turn Test mode onTo turn Test mode off To remotely activate X10 devices 07About the Master Keypad GeneralMaster Keypad Definitions 2ARMED 3READYLights on / Lights OFF Keys Turns About the Display and Indicators LED MeaningsSecuring the Premises Checking System StatusRestarting Exit Delay While System Armed Arming in Stay ModeArming In Away Mode Exit Delay Restart/ResetTo arm with no Delay if Quick Arm is active Auto Stay FeatureArming the System with No Delay Quick ArmingEntry Delay Entry/Exit DelaysExit Delay LYNXR-2SIA Exit/Entry Delay TimesTo disarm the system and silence burglary alarms Memory of AlarmDisarming the System Forced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesChime Mode Panic Keys / Chime ModePanic Keys Automatic Paging Paging FeatureUser Functions Code FormatSystem Announcements Follow Me Announcement FeatureFollow Me Reminder and System Announcements Reminder AnnouncementsTo program Follow Me reminder telephone number To delete Follow Me reminder telephone numberDevice Descriptions To deactivate X10 devices 07Message Playback Message Recording/Playback/Volume ControlRecording a Message Deleting MessagesTo adjust message playback/system announcement volume Adjusting the VolumeTo restore announcement sounding Function + Defining the AUX Function AUX FunctionPerforming the AUX function Minute Clock/CalendarHour MonthDay YearScheduling User Interface = the value that was last stored in the memory Schedule numberEnd Time minute Event Identifier Entries Entry Event CommentDay of Week Entries Entry DayUsing Remote Phone Control Feature Remote Phone Control FeatureEnter To remotely arm in Away mode Remote Phone Control Commands To remotely disarm systemTo remotely Bypass zones Speaker Phone Feature Using the Speaker Phone FeatureEntering # + Remote Services General Information Silencing a Fire AlarmCase of Fire Fire Alarm System Living Room BedroomEmergency Evacuation Security Codes System FunctionsTo Add/Delete a User or Change a Users Code Entering Test Mode Testing the System to be conducted weeklyExit Test Mode Typical Trouble Condition Displays Trouble MessagesRoutine Care Changing the LYNXR-2 Series System Battery Low Battery Conditions in Wireless SensorsMaintaining your system Summary of Audible Notification Sound Cause Display AnnouncementAdditional Announcements Federal Communications Commission FCC Part 15 Statement Industry CanadaFederal Communications Commission FCC Part Ringer Equivalence Number NoticeEvent of Telephone Operational Problems Servicing Information Page Owners Insurance Premium Credit Request Notifies Insert B = Burglary, F = FireOwners Insurance Premium Credit Request Limitations of this Alarm System Page Page Page Index No delay Pager ONE Year Limited Warranty ÊK15012yŠ

LYNXR-2 specifications

The Honeywell LYNXR-2 is an advanced wireless security system designed for residential and light commercial applications. Recognized for its user-friendly interface, the LYNXR-2 combines cutting-edge technology with essential security features, making it a popular choice among homeowners seeking peace of mind.

One of the primary characteristics of the LYNXR-2 is its sleek, modern design, which includes a large, easy-to-read touchscreen display. This intuitive interface allows users to manage their security system with minimal effort. From arming and disarming the system to viewing alerts, the touchscreen simplifies the interaction for users of all ages.

The LYNXR-2 employs Honeywell’s innovative technology, which integrates both security and home automation functionalities. This powerful system supports a wide range of wireless sensors, including door/window contacts, motion detectors, and smoke detectors. The flexibility of wireless technology means users can easily expand their security coverage without the need for complicated wiring.

Another notable feature of the LYNXR-2 is its built-in Z-Wave technology. This allows for seamless integration with smart home devices, enabling users to control lights, locks, and thermostats through the same interface. Home automation capabilities enhance security further by allowing users to program their system to perform specific actions, such as turning on lights when entering a home.

The LYNXR-2 system also offers robust communication features. It comes equipped with a cellular backup, ensuring that users remain connected to monitoring services even during power outages or if the phone line is cut. Additionally, the system supports both IP and cellular connectivity, providing flexibility in how users choose to connect their systems to monitoring services.

For those looking for added functionality, the LYNXR-2 can be easily integrated with Honeywell’s Total Connect Remote Services. This allows users to monitor and control their security system remotely through a smartphone or tablet, providing real-time notifications and updates on system status.

In summary, the Honeywell LYNXR-2 stands out for its combination of user-friendly features, advanced technologies, and extensive security and automation capabilities. It is an ideal solution for individuals seeking a reliable, scalable, and easy-to-use security system for their homes or light commercial properties. With its comprehensive features and seamless integration, the LYNXR-2 is poised to meet the security needs of modern living.
Top Page Image Contents