Honeywell LYNXR-2 manual System Overview, Features

Page 5

SYSTEM OVERVIEW

Features

General Information

This system offers you three forms of protection: burglary, fire, and emergency, depending on the configuration of your system. The system consists of a master keypad for controlling system operation, various wireless sensors that provide perimeter and interior burglary protection, and optional smoke or combustion detectors to provide early fire warning. In addition, optional wireless keypads may have been installed to allow you to control the system away from the master keypad. The system may also be controlled from a remote telephone and can be used as a speaker phone.

The system uses microcomputer technology to monitor all protection zones and system status, display appropriate information on the keypad display, and initiate appropriate alarms. Your system may also have been programmed to automatically send alarm or status messages over the phone lines to a central alarm monitoring station, and may also be capable of two-way voice communication with the central station. Certain features apply only to LYNXR-2SIA version of the control.

The user features of this security system are listed below. Ask your installer which features have been programmed for your system.

•STAY and AWAY arming modes: By using these modes you can protect either the perimeter only, or the entire premises.

•3 panic key functions: Designated keys allow you to manually activate fire, personal emergency, or silent alarms. Refer to the PANIC KEYS section for detailed information.

•Paging feature: If programmed by your installer this feature alerts you to certain system conditions by displaying code numbers that indicate the type of condition that has occurred. In addition, pressing the AUX key can send a predefined message to your pager, if programmed to do so (see AUX key function below). Refer to the PAGING FEATURE section for detailed information.

•Follow me system announcements: Allows the LYNXR-2 Series to dial a number, programmed by your installer, and deliver system announcements.

•Follow me reminder announcements: Allows the LYNXR-2 Series to dial a number that you have specified, at a programmed time and day and deliver a message programmed by your installer.

•Real-time clock: Keypad displays current time. Refer to the CLOCK/CALENDAR section for procedures for setting the time.

•Voice announcement of system status: The master keypad’s built-in speaker announces system status at the press of a key. Refer to the CHECKING SYSTEM STATUS section for detailed information.

•Message center: The system allows recording and play back of brief messages. Refer to the RECORDING/PLAYBACK MESSAGES section for procedures.

•Device activation: Designated keys allow you to turn lights and/or other devices on and off. In addition, some devices (e.g., a light) may be programmed to activate automatically as a result of a system event such as an alarm or trouble condition. Refer to the USING POWERLINE CARRIER DEVICE COMMANDS section for detailed information.

•AUX key function: Designated key lets you activate a predefined series of keystrokes with a single

press of the

AUX

key plus user code, or manually send a pager message. It will also allow you to

manually send a voice message to phone number that has been programmed by your installer. Ask

your installer which of these features has been assigned to the

the AUX FUNCTION section for detailed information.

AUX

key in your LYNXR-2. Refer to

– 5 –

Page 4 Page 6
Image 5
Page 4 Page 6
Contents LYNXR-2 Series Security System Page Table of Contents Page System Overview FeaturesLYNXR-2SIA False Alarm Prevention Features General Operation Two-Way Voice Feature Quick View of System Functions To turn Test mode off To turn Test mode onTo remotely activate X10 devices To remotely activate X10 devices 07General About the Master Keypad2ARMED 3READY Master Keypad DefinitionsLights on / Lights OFF Keys Turns LED Meanings About the Display and IndicatorsChecking System Status Securing the PremisesArming In Away Mode Arming in Stay ModeRestarting Exit Delay While System Armed Exit Delay Restart/ResetArming the System with No Delay Auto Stay FeatureTo arm with no Delay if Quick Arm is active Quick ArmingExit Delay Entry/Exit DelaysEntry Delay LYNXR-2SIA Exit/Entry Delay TimesDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Bypassing Individual Zones Bypassing Protection ZonesForced Bypass Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode User Functions Paging FeatureAutomatic Paging Code FormatFollow Me Reminder and System Announcements Follow Me Announcement FeatureSystem Announcements Reminder AnnouncementsTo delete Follow Me reminder telephone number To program Follow Me reminder telephone numberTo deactivate X10 devices 07 Device DescriptionsRecording a Message Message Recording/Playback/Volume ControlMessage Playback Deleting MessagesTo restore announcement sounding Function + Adjusting the VolumeTo adjust message playback/system announcement volume Performing the AUX function AUX FunctionDefining the AUX Function Hour Clock/CalendarMinute MonthYear DayScheduling User Interface Schedule number = the value that was last stored in the memoryEnd Time minute Entry Event Comment Event Identifier EntriesEntry Day Day of Week EntriesEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely Bypass zones Remote Phone Control Commands To remotely disarm systemTo remotely arm in Away mode Using the Speaker Phone Feature Speaker Phone FeatureEntering # + Remote Services Case of Fire Silencing a Fire AlarmGeneral Information Living Room Bedroom Fire Alarm SystemEmergency Evacuation To Add/Delete a User or Change a Users Code System FunctionsSecurity Codes Exit Test Mode Testing the System to be conducted weeklyEntering Test Mode Routine Care Trouble MessagesTypical Trouble Condition Displays Maintaining your system Low Battery Conditions in Wireless SensorsChanging the LYNXR-2 Series System Battery Sound Cause Display Announcement Summary of Audible NotificationAdditional Announcements Industry Canada Federal Communications Commission FCC Part 15 StatementRinger Equivalence Number Notice Federal Communications Commission FCC PartEvent of Telephone Operational Problems Servicing Information Page Notifies Insert B = Burglary, F = Fire Owners Insurance Premium Credit RequestOwners Insurance Premium Credit Request Limitations of this Alarm System Page Page Page Index No delay Pager ONE Year Limited Warranty ÊK15012yŠ

LYNXR-2 specifications

The Honeywell LYNXR-2 is an advanced wireless security system designed for residential and light commercial applications. Recognized for its user-friendly interface, the LYNXR-2 combines cutting-edge technology with essential security features, making it a popular choice among homeowners seeking peace of mind.

One of the primary characteristics of the LYNXR-2 is its sleek, modern design, which includes a large, easy-to-read touchscreen display. This intuitive interface allows users to manage their security system with minimal effort. From arming and disarming the system to viewing alerts, the touchscreen simplifies the interaction for users of all ages.

The LYNXR-2 employs Honeywell’s innovative technology, which integrates both security and home automation functionalities. This powerful system supports a wide range of wireless sensors, including door/window contacts, motion detectors, and smoke detectors. The flexibility of wireless technology means users can easily expand their security coverage without the need for complicated wiring.

Another notable feature of the LYNXR-2 is its built-in Z-Wave technology. This allows for seamless integration with smart home devices, enabling users to control lights, locks, and thermostats through the same interface. Home automation capabilities enhance security further by allowing users to program their system to perform specific actions, such as turning on lights when entering a home.

The LYNXR-2 system also offers robust communication features. It comes equipped with a cellular backup, ensuring that users remain connected to monitoring services even during power outages or if the phone line is cut. Additionally, the system supports both IP and cellular connectivity, providing flexibility in how users choose to connect their systems to monitoring services.

For those looking for added functionality, the LYNXR-2 can be easily integrated with Honeywell’s Total Connect Remote Services. This allows users to monitor and control their security system remotely through a smartphone or tablet, providing real-time notifications and updates on system status.

In summary, the Honeywell LYNXR-2 stands out for its combination of user-friendly features, advanced technologies, and extensive security and automation capabilities. It is an ideal solution for individuals seeking a reliable, scalable, and easy-to-use security system for their homes or light commercial properties. With its comprehensive features and seamless integration, the LYNXR-2 is poised to meet the security needs of modern living.
Top Page Image Contents