Honeywell LYNXR-2 User Functions, Paging Feature, Automatic Paging, Code Format, Manual Paging

Page 22

USER FUNCTIONS

Paging Feature

Automatic Paging

If the Paging feature has been programmed for your system, your pager will respond to certain conditions as they occur in your system by displaying a message that indicates the type of condition that has occurred. The message appears in a 7-digit format explained below. The system can also be programmed to send up to 16 additional digits that will appear in front of the 7-digit message. These 16 digits may consist of a PIN number or special digits needed by the pager, account number, pauses, or any other special characters you may choose (for example, you may want to use a special character code to distinguish between security system messages and usual pager messages). See your installer if these additional characters are desired.

Code Format

The Pager Code takes the following form: (AAAAAAAAAAAAAAAA) EEE-0NNNAAA… = Optional 16 digits, programmed by your installer.

EEE = 3-digit number describing the event that has occurred, as follows:

911 = Alarm (00NN following indicates the zone that caused the alarm)

101 = Open, system disarmed (00NN following indicates user number)

102 = Close, system armed (00NN following indicates user number)

811 = Trouble (00NN following indicates the zone that caused the trouble)

0NNN = First digit is always 0, followed by 3-digit user or zone number, depending on the type of event that occurred. If NN = 00, it can mean an AC loss has occurred, the system battery is low, or a 5827 wireless keypad battery is low. The Master Keypad will indicate the specific condition.

Examples:

Pager displays:

911–0004

This indicates your system is reporting an alarm (911) due to a fault on zone 4 (0004).

Pager displays:

101–0005

This indicates that your system is reporting an open/disarm (101) by user 5 (0005).

Manual Paging

In addition, your system may have been programmed to send a unique pager message when the

AUX

key is pressed (see AUX FUNCTION section for alternate function of this key). The actual message sent is 999-9999 (the hyphen may not appear, depending on your pager service). This code can be used to alert the person with the pager to whatever meaning you pre-arrange (e.g., “call home”). Ask your installer if this has been done for your system.

To manually send the pager message, if programmed:

AUX (hold until 4 beeps sound)

– 22 –

Image 22
Contents LYNXR-2 Series Security System Page Table of Contents Page Features System OverviewLYNXR-2SIA False Alarm Prevention Features General Operation Two-Way Voice Feature Quick View of System Functions To remotely activate X10 devices To turn Test mode onTo turn Test mode off To remotely activate X10 devices 07About the Master Keypad GeneralMaster Keypad Definitions 2ARMED 3READYLights on / Lights OFF Keys Turns About the Display and Indicators LED MeaningsSecuring the Premises Checking System StatusRestarting Exit Delay While System Armed Arming in Stay ModeArming In Away Mode Exit Delay Restart/ResetTo arm with no Delay if Quick Arm is active Auto Stay FeatureArming the System with No Delay Quick ArmingEntry Delay Entry/Exit DelaysExit Delay LYNXR-2SIA Exit/Entry Delay TimesTo disarm the system and silence burglary alarms Memory of AlarmDisarming the System Forced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesChime Mode Panic Keys / Chime ModePanic Keys Automatic Paging Paging FeatureUser Functions Code FormatSystem Announcements Follow Me Announcement FeatureFollow Me Reminder and System Announcements Reminder AnnouncementsTo program Follow Me reminder telephone number To delete Follow Me reminder telephone numberDevice Descriptions To deactivate X10 devices 07Message Playback Message Recording/Playback/Volume ControlRecording a Message Deleting MessagesTo adjust message playback/system announcement volume Adjusting the VolumeTo restore announcement sounding Function + Defining the AUX Function AUX FunctionPerforming the AUX function Minute Clock/CalendarHour MonthDay YearScheduling User Interface = the value that was last stored in the memory Schedule numberEnd Time minute Event Identifier Entries Entry Event CommentDay of Week Entries Entry DayUsing Remote Phone Control Feature Remote Phone Control FeatureEnter To remotely arm in Away mode Remote Phone Control Commands To remotely disarm systemTo remotely Bypass zones Speaker Phone Feature Using the Speaker Phone FeatureEntering # + Remote Services General Information Silencing a Fire AlarmCase of Fire Fire Alarm System Living Room BedroomEmergency Evacuation Security Codes System FunctionsTo Add/Delete a User or Change a Users Code Entering Test Mode Testing the System to be conducted weeklyExit Test Mode Typical Trouble Condition Displays Trouble MessagesRoutine Care Changing the LYNXR-2 Series System Battery Low Battery Conditions in Wireless SensorsMaintaining your system Summary of Audible Notification Sound Cause Display AnnouncementAdditional Announcements Federal Communications Commission FCC Part 15 Statement Industry CanadaFederal Communications Commission FCC Part Ringer Equivalence Number NoticeEvent of Telephone Operational Problems Servicing Information Page Owners Insurance Premium Credit Request Notifies Insert B = Burglary, F = FireOwners Insurance Premium Credit Request Limitations of this Alarm System Page Page Page Index No delay Pager ONE Year Limited Warranty ÊK15012yŠ

LYNXR-2 specifications

The Honeywell LYNXR-2 is an advanced wireless security system designed for residential and light commercial applications. Recognized for its user-friendly interface, the LYNXR-2 combines cutting-edge technology with essential security features, making it a popular choice among homeowners seeking peace of mind.

One of the primary characteristics of the LYNXR-2 is its sleek, modern design, which includes a large, easy-to-read touchscreen display. This intuitive interface allows users to manage their security system with minimal effort. From arming and disarming the system to viewing alerts, the touchscreen simplifies the interaction for users of all ages.

The LYNXR-2 employs Honeywell’s innovative technology, which integrates both security and home automation functionalities. This powerful system supports a wide range of wireless sensors, including door/window contacts, motion detectors, and smoke detectors. The flexibility of wireless technology means users can easily expand their security coverage without the need for complicated wiring.

Another notable feature of the LYNXR-2 is its built-in Z-Wave technology. This allows for seamless integration with smart home devices, enabling users to control lights, locks, and thermostats through the same interface. Home automation capabilities enhance security further by allowing users to program their system to perform specific actions, such as turning on lights when entering a home.

The LYNXR-2 system also offers robust communication features. It comes equipped with a cellular backup, ensuring that users remain connected to monitoring services even during power outages or if the phone line is cut. Additionally, the system supports both IP and cellular connectivity, providing flexibility in how users choose to connect their systems to monitoring services.

For those looking for added functionality, the LYNXR-2 can be easily integrated with Honeywell’s Total Connect Remote Services. This allows users to monitor and control their security system remotely through a smartphone or tablet, providing real-time notifications and updates on system status.

In summary, the Honeywell LYNXR-2 stands out for its combination of user-friendly features, advanced technologies, and extensive security and automation capabilities. It is an ideal solution for individuals seeking a reliable, scalable, and easy-to-use security system for their homes or light commercial properties. With its comprehensive features and seamless integration, the LYNXR-2 is poised to meet the security needs of modern living.