Honeywell LYNXR-2 manual Message Recording/Playback/Volume Control, Recording a Message

Page 26

USER FUNCTIONS

Message Recording/Playback/Volume Control

The LYNXR-2 Series Message Center allows you to record, play and delete messages. The maximum message duration is 85 seconds.

NOTES: (1) The Record/playback functions can only be performed from the master keypad. It cannot be performed from any other wireless keypad (ex. 5827).

(2)If the system loses electrical power, all messages will be erased.

(3)Message Play/Record will not be available if a report must be sent.

(4)Individual messages cannot be played back or deleted.

Recording a Message

To record a message:

FUNCTION + RECORD

The keypad displays “REC MESSAGE.” Begin speaking into the microphone.

The recording will automatically stop after 85 seconds, if a message has been recorded. The keypad will beep twice and “REC” will no longer be displayed. “MESSAGE” will still be displayed.

To stop recording before the end of 85 seconds: Press OFF

The keypad beeps twice, the REC display turns off, but the MESSAGE display remains on.

Additional messages can be recorded, as long as there is recording time remaining, by repeating the above steps.

NOTE: If you are trying to record a new message and the message center is already full, the system will announce “END MESSAGE” and “REC MESSAGE” will not be displayed. If the message center is full all old messages must be deleted before new messages can be recorded. See Deleting Messages section.

Message Playback

The lighted word MESSAGE indicates that a new message is in memory. After playing the message, the MESSAGE display turns off. See NOTE below if using a wireless keypad.

To play back a message:

FUNCTION + PLAY

All recorded messages will be announced sequentially. A short beep will sound between messages.

To skip a message: Press []

Deleting Messages

To delete all messages: FUNCTION + PLAY

While the messages are being announced: Press

FUNCTION + DELETE

A double beep will sound confirming that the messages have been deleted.

– 26 –

Image 26
Contents LYNXR-2 Series Security System Page Table of Contents Page Features System OverviewLYNXR-2SIA False Alarm Prevention Features General Operation Two-Way Voice Feature Quick View of System Functions To remotely activate X10 devices To turn Test mode onTo turn Test mode off To remotely activate X10 devices 07About the Master Keypad GeneralMaster Keypad Definitions 2ARMED 3READYLights on / Lights OFF Keys Turns About the Display and Indicators LED MeaningsSecuring the Premises Checking System StatusRestarting Exit Delay While System Armed Arming in Stay ModeArming In Away Mode Exit Delay Restart/ResetTo arm with no Delay if Quick Arm is active Auto Stay FeatureArming the System with No Delay Quick ArmingEntry Delay Entry/Exit DelaysExit Delay LYNXR-2SIA Exit/Entry Delay TimesDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Forced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode Automatic Paging Paging FeatureUser Functions Code FormatSystem Announcements Follow Me Announcement FeatureFollow Me Reminder and System Announcements Reminder AnnouncementsTo program Follow Me reminder telephone number To delete Follow Me reminder telephone numberDevice Descriptions To deactivate X10 devices 07Message Playback Message Recording/Playback/Volume ControlRecording a Message Deleting MessagesTo restore announcement sounding Function + Adjusting the VolumeTo adjust message playback/system announcement volume Performing the AUX function AUX FunctionDefining the AUX Function Minute Clock/CalendarHour MonthDay YearScheduling User Interface = the value that was last stored in the memory Schedule numberEnd Time minute Event Identifier Entries Entry Event CommentDay of Week Entries Entry DayEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely Bypass zones Remote Phone Control Commands To remotely disarm systemTo remotely arm in Away mode Speaker Phone Feature Using the Speaker Phone FeatureEntering # + Remote Services Case of Fire Silencing a Fire AlarmGeneral Information Fire Alarm System Living Room BedroomEmergency Evacuation To Add/Delete a User or Change a Users Code System FunctionsSecurity Codes Exit Test Mode Testing the System to be conducted weeklyEntering Test Mode Routine Care Trouble MessagesTypical Trouble Condition Displays Maintaining your system Low Battery Conditions in Wireless SensorsChanging the LYNXR-2 Series System Battery Summary of Audible Notification Sound Cause Display AnnouncementAdditional Announcements Federal Communications Commission FCC Part 15 Statement Industry CanadaFederal Communications Commission FCC Part Ringer Equivalence Number NoticeEvent of Telephone Operational Problems Servicing Information Page Owners Insurance Premium Credit Request Notifies Insert B = Burglary, F = FireOwners Insurance Premium Credit Request Limitations of this Alarm System Page Page Page Index No delay Pager ONE Year Limited Warranty ÊK15012yŠ

LYNXR-2 specifications

The Honeywell LYNXR-2 is an advanced wireless security system designed for residential and light commercial applications. Recognized for its user-friendly interface, the LYNXR-2 combines cutting-edge technology with essential security features, making it a popular choice among homeowners seeking peace of mind.

One of the primary characteristics of the LYNXR-2 is its sleek, modern design, which includes a large, easy-to-read touchscreen display. This intuitive interface allows users to manage their security system with minimal effort. From arming and disarming the system to viewing alerts, the touchscreen simplifies the interaction for users of all ages.

The LYNXR-2 employs Honeywell’s innovative technology, which integrates both security and home automation functionalities. This powerful system supports a wide range of wireless sensors, including door/window contacts, motion detectors, and smoke detectors. The flexibility of wireless technology means users can easily expand their security coverage without the need for complicated wiring.

Another notable feature of the LYNXR-2 is its built-in Z-Wave technology. This allows for seamless integration with smart home devices, enabling users to control lights, locks, and thermostats through the same interface. Home automation capabilities enhance security further by allowing users to program their system to perform specific actions, such as turning on lights when entering a home.

The LYNXR-2 system also offers robust communication features. It comes equipped with a cellular backup, ensuring that users remain connected to monitoring services even during power outages or if the phone line is cut. Additionally, the system supports both IP and cellular connectivity, providing flexibility in how users choose to connect their systems to monitoring services.

For those looking for added functionality, the LYNXR-2 can be easily integrated with Honeywell’s Total Connect Remote Services. This allows users to monitor and control their security system remotely through a smartphone or tablet, providing real-time notifications and updates on system status.

In summary, the Honeywell LYNXR-2 stands out for its combination of user-friendly features, advanced technologies, and extensive security and automation capabilities. It is an ideal solution for individuals seeking a reliable, scalable, and easy-to-use security system for their homes or light commercial properties. With its comprehensive features and seamless integration, the LYNXR-2 is poised to meet the security needs of modern living.