WARNING
Electrical Shock Hazard Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in death, fire, or electrical shock.
4.Plug into a grounded 3 prong outlet.
5.Press RESET on power supply cord.
AIR CONDITIONER USE
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
■If you turn off the air conditioner, wait at least 3 minutes before turning it back on. This prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
■Do not try to operate your air conditioner in the cooling mode when outside temperature is below 66°F (19°C). The inside evaporator coil will freeze up, and the air conditioner will not operate properly.
NOTES:
■In the event of a power failure, your air conditioner will operate at the previous settings when the power is restored.
■If the electronic control will not respond to touch pad or remote control commands, it is necessary to unplug the unit from the electrical outlet for 5 seconds before plugging back in.
StartingYourAirConditioner
Models without heat
Models with heat
1.Remove clear protective film from control panel.
2.Press POWER to turn on air conditioner.
NOTE: When the air conditioner is turned on, it will display the previous settings for the mode, fan speed and temperature.
3.Choose mode. See “Mode.”
4.Choose fan speed. See “Fan Speed.”
5.Choose temperature. See “Temperature.”
9