First Alert K596-1 9 manual Arming the System, Arming in Stay Mode, Arming In Away Mode

Page 14

6(&85,1*￿7+(￿35(0,6(6￿

Arming the System

Arming in Stay Mode

Use this mode when you are staying home, but expect someone to use the entrance door later. Close all protected perimeter windows and doors before arming. The green READY indicator on the keypad should be lit if the system is ready to be armed.

To arm in STAY mode:

 

 

 

 

 

 

 

 

+

STAY

or press and hold

STAY

 

Your User code

**

 

 

 

** See Quick Arming paragraph.

 

 

 

 

 

 

 

 

 

 

 

 

The keypad beeps three times and displays the armed STAY message. The red ARMED indicator lights and

 

the system announces “

armed STAY–exit now

 

 

.”

 

 

When armed in STAY mode, the system will sound an alarm if a protected door or window is opened, but you may otherwise move freely throughout the premises. Late arrivals can enter through the entrance without causing an alarm, but they must disarm the system within the entry delay period or an alarm will occur.

Restarting Exit Delay While System Armed

Ask your installer if this feature is active for your system. If active, you can restart the exit delay at any time after arming in STAY mode. This is useful if you wish to open the entry/exit door to let someone in after arming the system, and avoids having to disarm the system and then re-arm it again.

To restart exit delay while system is armed in STAY mode:

Press

STAY

key

**

door

Arming In Away Mode

Use this mode when no one will be staying on the premises. Close all protected perimeter windows and doors before arming. The green READY indicator on the keypad should be lit if the system is ready to be armed.

To arm in AWAY mode:

 

 

 

 

 

 

 

+

AWAY

or press and hold

Your User code

**

 

 

** See Quick Arming paragraph.

 

 

 

 

 

 

The keypad beeps twice, or beeps continuously if exit warning has been programmed for your system, and displays the armed AWAY message. The red ARMED indicator lights and the system announces “

AWAY–exit now

.”

When armed in AWAY mode, the system will sound an alarm if a protected door or window is opened, or if any movement is detected inside the premises. You may leave through the entrance door during the exit delay period without causing an alarm. You may also re-enter through the entrance

disarm the system within the entry delay period or an alarm will occur.

AWAY **

armed

door, but you must

– 14 –

Page 13 Page 15
Image 14
Page 13 Page 15
Contents 5HDG\*XDUG51 $%/2&217176 General Information Features66702959 Function section for detailed informationSecurity Codes General Operation Memory of alarm display Two-Way Voice FeatureOFF or until alarm bell timeout Announced, the siren soundsSecurity Functions Volume Adjustment48,&.9,2667081&7,216 Message CenterTo remotely activate forced bypass To remotely activate X-10 devicesTo remotely bypass a zone To set schedulingAbout the Master Keypad GeneralMaster Keypad Definitions Be repeated from its beginningKeys KeysKEY About the Display and Indicators System Can Be Armed Checking System StatusPress the Status Key PressArming the System Arming in Stay ModeArming In Away Mode Quick Arming Arming the System With No DelayTo arm with no Delay ArmEntry Delay Entry/Exit DelaysExit Delay Exit AlarmsDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Police from a nearby safe locationForced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode Code Format Paging FeatureAutomatic Paging Manual PagingTo deactivate X-10 devices Device DescriptionsTo activate X-10 devices To activate X-10 devices 7Recording a Message Message Recording/Playback/Volume ControlAdjusting the Volume Message PlaybackDefining the AUX Function Performing the AUX functionClock/Calendar AM/PMScheduling User Interface Begin Time am/pm Event IdentifierBegin Time hour End Time hour Begin Time minuteBegin Day End Time am/pmEvent Identifier Entries Entry EventDay of Week Entries Entry DayEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely disarm system To remotely arm in Stay modeTo remotely arm in Away or Stay mode with no delay To remotely deactivate X-10 devicesSystem will not enter speaker phone mode if Speaker Phone FeatureUsing the Speaker Phone Feature Speaker phone will be aborted ifGeneral Information $/$506670If InstalledSilencing a Fire Alarm Case of Fire$/$506670 BasementEscape quickly dont panic Emergency EvacuationDetermine two means of escape from each room. One path To Add/Delete a User or Change a Users Code 667081&7,216Security Codes Add a user codeExit Test Mode Testing the System to be conducted weeklyEntering Test Mode When testing is completed, exit the Test mode by enteringRoutine Care Trouble MessagesTypical Trouble Condition Displays LOW BATTo silence Low Battery Warning Tones at the Keypad Low Battery Conditions in Wireless SensorsChanging the ReadyGuard-REN System Battery Maintaining your systemChime System Low BatteryZones Bypassed TELEPHONE/MODEM Interface Event of Telephone Operational ProblemsRadio Frequency Emissions First Alert Professionals ReadyGuard-REN Other TestingGeneral Information Notifies Insert B = Burglary, F = FireFront Door Owners Insurance Premium Credit RequestFurnace Room Kitchen Basement 1st Floor WindowsAway Mode 12, 38Rechargeable, Nickel-Metal Hydride Battery Master UserDeath Or otAre not put in proper EverServicing Information ONE Year Limited Warranty Your security equipment or the Seller for product repair

1, K596-1 9 specifications

The First Alert K596-1 9,1 is a state-of-the-art smoke and carbon monoxide (CO) detector designed to enhance home safety. This innovative device combines advanced features and cutting-edge technology to provide reliable protection against two of the leading causes of accidental deaths in the home.

One of the standout features of the K596-1 is its **photoelectric smoke sensing technology**. This technology is particularly effective at detecting slow-smoldering fires, which typically produce larger particles of smoke. By using a light source and a sensor, the device can identify these particles quickly, thus reducing the likelihood of false alarms that are common with traditional ionization detectors.

In addition to smoke detection, the K596-1 also features a **carbon monoxide sensor**. CO is a colorless, odorless gas that can be fatal in high concentrations. The detector continuously monitors for this dangerous gas, providing peace of mind for families. If elevated levels are detected, the alarm will sound, alerting occupants to the potential danger.

The First Alert K596-1 is designed with **user-friendly features** in mind. An easy-to-read LED display provides real-time information on battery status and system functionality. The unit also includes a voice alert feature that announces the type of danger detected, whether smoke or carbon monoxide, making it easier for occupants to respond appropriately.

Battery life is another important characteristic of the K596-1. It utilizes a long-life battery that can last for several years, reducing the frequency of battery changes and ensuring that the device remains operational without constant maintenance. The easy-access battery compartment allows for a straightforward replacement when necessary.

Installation is simple, too, making the K596-1 accessible to users of all skill levels. The device can be mounted on walls or ceilings, and its compact design ensures that it blends seamlessly into any home environment.

In summary, the First Alert K596-1 9,1 is a crucial safety device that combines advanced detection capabilities with user-friendly features. Its photoelectric sensing technology and carbon monoxide detection work in tandem to provide comprehensive coverage against fire and gas hazards. With its easy installation and reliable performance, the K596-1 is a wise investment for anyone looking to enhance their home safety.
Top Page Image Contents