First Alert K596-1 9 manual Event Identifier, Begin Time hour, Begin Time am/pm

Page 26

86(5￿)81&7,216￿

Scheduling User Interface

NOTE: The keypad beeps twice for invalid data entries (e.g.: an hour greater than 12), and the entry will not be accepted. The keypad beeps once for valid entries and four times when a schedule event is programmed successfully.

[x] = the value that was last stored in the memory.

 

 

 

 

Schedule number

Enter the 1-digit schedule number to be programmed, then press

 

￿ x

n

 

[x] = schedule number 1 to 8

[*] to accept and advance to the next programming field: Event

 

 

[*] = continue

Identifier.

 

 

 

 

 

[#] = exit schedule programming

• Press the [#] key in this entry will exit the schedule

 

 

 

 

 

 

 

mode

programming mode. The keypad will beep four times and

 

 

 

 

 

exit.

 

 

 

 

 

 

• Schedule number 7 and 8 are always random events that are

 

 

 

 

 

meant to work only with X-10 devices.

 

 

 

 

 

NOTE:

This feature should be implemented when the user is

 

 

 

 

 

 

trying to give the impression that a premises is “lived

 

 

 

 

 

 

in”. The events will occur at random times (0-59

 

 

 

 

 

 

minutes) within the defined hour.

 

 

 

 

 

 

 

 

 

 

Event Identifier

0 = Empty - no event scheduled (or schedule temporarily

 

￿￿

id

 

[x] = event identifier 0 to 5

disabled. Keypad will beep four times and return to Schedule

 

 

Number with the schedule number advanced.

 

x

 

[*] = continue

1 = X-10 Device - the user is required to enter data up to and

 

 

 

 

[#] = return to previous prompt

 

 

 

 

 

 

 

 

include the Device Number screen. Selection #1 is a time

 

 

 

 

 

driven event that requires a begin and end time.

 

 

 

 

 

2 = Latch Key Report - the user is required to enter data up to

 

 

 

 

 

and include the End Day screen. Selection #2 is a window

 

 

 

 

 

driven event that requires a begin/end time.

 

 

 

 

 

3 = Automatic Stay Arming - the user is required to enter data

 

 

 

 

 

up to and include the Begin Day screen. Selection #3 is a time

 

 

 

 

 

driven event that requires a begin time to send a report.

 

 

 

 

 

4 = Reminder Announcements - the user is required to enter

 

 

 

 

 

data up to and include the Begin Day screen. This is a reminder

 

 

 

 

 

announcement.

 

 

 

 

 

5 = Alarm Clock - the user is required to enter the field values

 

 

 

 

 

up to and include the Begin Day screen. This is a an alarm

 

 

 

 

 

clock.

 

 

 

 

 

 

NOTE:

See figure 1 for an explanation of each entry of the

 

 

 

 

 

 

event identifier.

 

 

 

 

 

 

 

 

 

 

Begin Time (hour)

• The begin hour is a two-digit entry. To enter the hour 3,

 

xx:￿b

 

[xx] = begin hour 00 to 12

press “0” followed by “3”.

 

 

[*] = continue

• The begin hour “00” indicates this schedule does not have a

 

 

 

 

[#] = return to previous prompt

begin time.

 

 

 

 

 

 

 

Begin Time (am/pm)

• Press “0” to select AM or “1” to select PM.

 

 

 

 

NOTE:

When programming schedule number 7 and 8, do not

 

 

 

 

[0] = begin time, am (A)

 

program turn on/off to occur within the same 1-hour

 

 

 

 

[1] = begin time, pm (P)

 

period. This will prevent this random feature from

 

 

 

 

[*] = continue

 

causing a reversal of the on/off times.

 

 

 

 

[#] = return to previous prompt

 

 

 

 

 

 

 

 

 

– 26 –

Page 25 Page 27
Image 26
Page 25 Page 27
Contents 5HDG\*XDUG51 $%/2&217176 General Information Features66702959 Function section for detailed informationSecurity Codes General Operation Memory of alarm display Two-Way Voice FeatureOFF or until alarm bell timeout Announced, the siren soundsSecurity Functions Volume Adjustment48,&.9,2667081&7,216 Message CenterTo remotely activate forced bypass To remotely activate X-10 devicesTo remotely bypass a zone To set schedulingAbout the Master Keypad GeneralMaster Keypad Definitions Be repeated from its beginningKeys KeysKEY About the Display and Indicators System Can Be Armed Checking System StatusPress the Status Key PressArming the System Arming in Stay ModeArming In Away Mode Quick Arming Arming the System With No DelayTo arm with no Delay ArmEntry Delay Entry/Exit DelaysExit Delay Exit AlarmsDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Police from a nearby safe locationForced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesPanic Keys Panic Keys / Chime ModeChime Mode Code Format Paging FeatureAutomatic Paging Manual PagingTo deactivate X-10 devices Device DescriptionsTo activate X-10 devices To activate X-10 devices 7Recording a Message Message Recording/Playback/Volume ControlAdjusting the Volume Message PlaybackDefining the AUX Function Performing the AUX functionClock/Calendar AM/PMScheduling User Interface Begin Time am/pm Event IdentifierBegin Time hour End Time hour Begin Time minuteBegin Day End Time am/pmEvent Identifier Entries Entry EventDay of Week Entries Entry DayEnter Remote Phone Control FeatureUsing Remote Phone Control Feature To remotely disarm system To remotely arm in Stay modeTo remotely arm in Away or Stay mode with no delay To remotely deactivate X-10 devicesSystem will not enter speaker phone mode if Speaker Phone FeatureUsing the Speaker Phone Feature Speaker phone will be aborted ifGeneral Information $/$506670If InstalledSilencing a Fire Alarm Case of Fire$/$506670 BasementEscape quickly dont panic Emergency EvacuationDetermine two means of escape from each room. One path To Add/Delete a User or Change a Users Code 667081&7,216Security Codes Add a user codeExit Test Mode Testing the System to be conducted weeklyEntering Test Mode When testing is completed, exit the Test mode by enteringRoutine Care Trouble MessagesTypical Trouble Condition Displays LOW BATTo silence Low Battery Warning Tones at the Keypad Low Battery Conditions in Wireless SensorsChanging the ReadyGuard-REN System Battery Maintaining your systemChime System Low BatteryZones Bypassed TELEPHONE/MODEM Interface Event of Telephone Operational ProblemsRadio Frequency Emissions First Alert Professionals ReadyGuard-REN Other TestingGeneral Information Notifies Insert B = Burglary, F = FireFront Door Owners Insurance Premium Credit RequestFurnace Room Kitchen Basement 1st Floor WindowsAway Mode 12, 38Rechargeable, Nickel-Metal Hydride Battery Master UserDeath Or otAre not put in proper EverServicing Information ONE Year Limited Warranty Your security equipment or the Seller for product repair

1, K596-1 9 specifications

The First Alert K596-1 9,1 is a state-of-the-art smoke and carbon monoxide (CO) detector designed to enhance home safety. This innovative device combines advanced features and cutting-edge technology to provide reliable protection against two of the leading causes of accidental deaths in the home.

One of the standout features of the K596-1 is its **photoelectric smoke sensing technology**. This technology is particularly effective at detecting slow-smoldering fires, which typically produce larger particles of smoke. By using a light source and a sensor, the device can identify these particles quickly, thus reducing the likelihood of false alarms that are common with traditional ionization detectors.

In addition to smoke detection, the K596-1 also features a **carbon monoxide sensor**. CO is a colorless, odorless gas that can be fatal in high concentrations. The detector continuously monitors for this dangerous gas, providing peace of mind for families. If elevated levels are detected, the alarm will sound, alerting occupants to the potential danger.

The First Alert K596-1 is designed with **user-friendly features** in mind. An easy-to-read LED display provides real-time information on battery status and system functionality. The unit also includes a voice alert feature that announces the type of danger detected, whether smoke or carbon monoxide, making it easier for occupants to respond appropriately.

Battery life is another important characteristic of the K596-1. It utilizes a long-life battery that can last for several years, reducing the frequency of battery changes and ensuring that the device remains operational without constant maintenance. The easy-access battery compartment allows for a straightforward replacement when necessary.

Installation is simple, too, making the K596-1 accessible to users of all skill levels. The device can be mounted on walls or ceilings, and its compact design ensures that it blends seamlessly into any home environment.

In summary, the First Alert K596-1 9,1 is a crucial safety device that combines advanced detection capabilities with user-friendly features. Its photoelectric sensing technology and carbon monoxide detection work in tandem to provide comprehensive coverage against fire and gas hazards. With its easy installation and reliable performance, the K596-1 is a wise investment for anyone looking to enhance their home safety.
Top Page Image Contents