First Alert 1 To remotely disarm system, To remotely arm in Stay mode, To remotely Bypass zones

Page 31

86(5￿)81&7,216￿

Enter:

Your user code

The system status will be announced.

Remote Phone Control Feature

(within eight seconds)

Remote Phone Control Commands

To remotely disarm system:

To remotely arm in AWAY mode:

+ [1]

Your user code

+ [2]

Your user code

To remotely arm in STAY mode:

+ [3]

Your user code

To remotely arm in AWAY or STAY mode with no delay:

+ [2] or [3] + [0]

Your user code

To remotely activate X-10 devices 1-6:

To remotely activate X-10 devices 7 & 8:

[#] + [4] + device no.

+ [#] + [4] + device no.

Your user code

To remotely deactivate X-10 devices 1-6:

[#] + [7] + device no.

To remotely deactivate X-10 devices 7 & 8:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Your user code

+ [#] + [7] + device no.

To remotely Bypass zones:

Your user code

+ [6] + zone no.

To remotely activate Forced Bypass:

+ [6] + [#]

Your user code

To remotely check system status:

[*]

To end remote phone session:

Hang Up or

Your user code

+ [9]

NOTES

:

(1)

Check with your installer to see if the Forced Bypass mode has been enabled.

 

 

(2)

When bypassing zones, make sure a confirmation beep sounds for each zone that has been bypassed.

– 31 –

Page 30 Page 32
Image 31
Page 30 Page 32
Contents 5HDG\*XDUG51 $%/2&217176 Function section for detailed information Features66702959 General InformationSecurity Codes General Operation Announced, the siren sounds Two-Way Voice FeatureOFF or until alarm bell timeout Memory of alarm displayMessage Center Volume Adjustment48,&.9,2667081&7,216 Security FunctionsTo set scheduling To remotely activate X-10 devicesTo remotely bypass a zone To remotely activate forced bypassGeneral About the Master KeypadBe repeated from its beginning Master Keypad DefinitionsKEY KeysKeys About the Display and Indicators Press Checking System StatusPress the Status Key System Can Be ArmedArming In Away Mode Arming in Stay ModeArming the System Arm Arming the System With No DelayTo arm with no Delay Quick ArmingExit Alarms Entry/Exit DelaysExit Delay Entry DelayPolice from a nearby safe location Memory of AlarmTo disarm the system and silence burglary alarms Disarming the SystemDisplaying Bypassed Zones Bypassing Protection ZonesBypassing Individual Zones Forced BypassChime Mode Panic Keys / Chime ModePanic Keys Manual Paging Paging FeatureAutomatic Paging Code FormatTo activate X-10 devices 7 Device DescriptionsTo activate X-10 devices To deactivate X-10 devicesMessage Playback Message Recording/Playback/Volume ControlAdjusting the Volume Recording a MessagePerforming the AUX function Defining the AUX FunctionAM/PM Clock/CalendarScheduling User Interface Begin Time hour Event IdentifierBegin Time am/pm End Time am/pm Begin Time minuteBegin Day End Time hourEntry Event Event Identifier EntriesEntry Day Day of Week EntriesUsing Remote Phone Control Feature Remote Phone Control FeatureEnter To remotely deactivate X-10 devices To remotely arm in Stay modeTo remotely arm in Away or Stay mode with no delay To remotely disarm systemSpeaker phone will be aborted if Speaker Phone FeatureUsing the Speaker Phone Feature System will not enter speaker phone mode ifCase of Fire $/$506670If InstalledSilencing a Fire Alarm General InformationBasement $/$506670Determine two means of escape from each room. One path Emergency EvacuationEscape quickly dont panic Add a user code 667081&7,216Security Codes To Add/Delete a User or Change a Users CodeWhen testing is completed, exit the Test mode by entering Testing the System to be conducted weeklyEntering Test Mode Exit Test ModeLOW BAT Trouble MessagesTypical Trouble Condition Displays Routine CareMaintaining your system Low Battery Conditions in Wireless SensorsChanging the ReadyGuard-REN System Battery To silence Low Battery Warning Tones at the KeypadZones Bypassed System Low BatteryChime Radio Frequency Emissions Event of Telephone Operational ProblemsTELEPHONE/MODEM Interface Notifies Insert B = Burglary, F = Fire TestingGeneral Information First Alert Professionals ReadyGuard-REN Other1st Floor Windows Owners Insurance Premium Credit RequestFurnace Room Kitchen Basement Front Door12, 38 Away ModeMaster User Rechargeable, Nickel-Metal Hydride BatteryEver Or otAre not put in proper DeathServicing Information Your security equipment or the Seller for product repair ONE Year Limited Warranty

1, K596-1 9 specifications

The First Alert K596-1 9,1 is a state-of-the-art smoke and carbon monoxide (CO) detector designed to enhance home safety. This innovative device combines advanced features and cutting-edge technology to provide reliable protection against two of the leading causes of accidental deaths in the home.

One of the standout features of the K596-1 is its **photoelectric smoke sensing technology**. This technology is particularly effective at detecting slow-smoldering fires, which typically produce larger particles of smoke. By using a light source and a sensor, the device can identify these particles quickly, thus reducing the likelihood of false alarms that are common with traditional ionization detectors.

In addition to smoke detection, the K596-1 also features a **carbon monoxide sensor**. CO is a colorless, odorless gas that can be fatal in high concentrations. The detector continuously monitors for this dangerous gas, providing peace of mind for families. If elevated levels are detected, the alarm will sound, alerting occupants to the potential danger.

The First Alert K596-1 is designed with **user-friendly features** in mind. An easy-to-read LED display provides real-time information on battery status and system functionality. The unit also includes a voice alert feature that announces the type of danger detected, whether smoke or carbon monoxide, making it easier for occupants to respond appropriately.

Battery life is another important characteristic of the K596-1. It utilizes a long-life battery that can last for several years, reducing the frequency of battery changes and ensuring that the device remains operational without constant maintenance. The easy-access battery compartment allows for a straightforward replacement when necessary.

Installation is simple, too, making the K596-1 accessible to users of all skill levels. The device can be mounted on walls or ceilings, and its compact design ensures that it blends seamlessly into any home environment.

In summary, the First Alert K596-1 9,1 is a crucial safety device that combines advanced detection capabilities with user-friendly features. Its photoelectric sensing technology and carbon monoxide detection work in tandem to provide comprehensive coverage against fire and gas hazards. With its easy installation and reliable performance, the K596-1 is a wise investment for anyone looking to enhance their home safety.
Top Page Image Contents