First Alert K596-1 9 manual Bypassing Protection Zones, Bypassing Individual Zones, Forced Bypass

Page 18

6(&85,1*￿7+(￿35(0,6(6￿

Bypassing Protection Zones

Bypassing Individual Zones

Use the

BYPASS

key when you want to arm your system with one or more zones intentionally unprotected.

 

Bypassed zones are unprotected and will not cause an alarm when violated while your system is armed.

All

bypasses are removed when an OFF sequence (security code plus OFF) is performed

. Bypasses are

also removed if the arming procedure that follows the bypass command is not successful.

The system will not allow fire zones to be bypassed.

The system must be disarmed first.

To bypass a zone(s):

Your user code

+

BYPASS

+ 2-digit zone number(s)

for zone(s) to be

bypassed (e.g., 01, 02, 03, etc.)

Important! All single-digit numbers must be preceded by a zero (for example, enter 01 for zone 1).

The keypad will provide a confirmation beep and display the word “BYPASS” along with each bypassed zone number. Wait for these zones to be displayed, to be sure that intended zones are bypassed.

Arm the system as usual when the keypad displays the READY LED on steady.

Forced Bypass

Your system may allow you to easily bypass all open (faulted) zones without having to enter zone numbers individually. Ask your installer if this feature is active.

To bypass a zone(s):

Your user code

+

BYPASS

+

FUNCTION

In a few moments, all open zones will be displayed along with the word “BYPASS.” Wait for these zones to be displayed before arming. Arming the system before zones are displayed eliminates all bypasses.

Arm the system as usual when the keypad displays the READY LED on steady.

Displaying Bypassed Zones

The system allows you to determine what zones have been previously bypassed. Bypassed zones can be displayed only when the system is disarmed, and when the “BYPASS” message described above is displayed.

To display bypassed zone(s):

 

 

 

 

 

 

 

+

BYPASS

 

 

 

 

 

 

 

 

 

 

Your user code

In a few moments, all open zones will be sequentially displayed along with the word “BYPASS.”

+WAIT

– 18 –

Page 17 Page 19
Image 18
Page 17 Page 19
Contents 5HDG\*XDUG51 $%/2&217176 General Information Features66702959 Function section for detailed informationSecurity Codes General Operation Memory of alarm display Two-Way Voice FeatureOFF or until alarm bell timeout Announced, the siren soundsSecurity Functions Volume Adjustment48,&.9,2667081&7,216 Message CenterTo remotely activate forced bypass To remotely activate X-10 devicesTo remotely bypass a zone To set schedulingAbout the Master Keypad GeneralMaster Keypad Definitions Be repeated from its beginningKeys KEYKeys About the Display and Indicators System Can Be Armed Checking System StatusPress the Status Key PressArming in Stay Mode Arming In Away ModeArming the System Quick Arming Arming the System With No DelayTo arm with no Delay ArmEntry Delay Entry/Exit DelaysExit Delay Exit AlarmsDisarming the System Memory of AlarmTo disarm the system and silence burglary alarms Police from a nearby safe locationForced Bypass Bypassing Protection ZonesBypassing Individual Zones Displaying Bypassed ZonesPanic Keys / Chime Mode Chime ModePanic Keys Code Format Paging FeatureAutomatic Paging Manual PagingTo deactivate X-10 devices Device DescriptionsTo activate X-10 devices To activate X-10 devices 7Recording a Message Message Recording/Playback/Volume ControlAdjusting the Volume Message PlaybackDefining the AUX Function Performing the AUX functionClock/Calendar AM/PMScheduling User Interface Event Identifier Begin Time hourBegin Time am/pm End Time hour Begin Time minuteBegin Day End Time am/pmEvent Identifier Entries Entry EventDay of Week Entries Entry DayRemote Phone Control Feature Using Remote Phone Control FeatureEnter To remotely disarm system To remotely arm in Stay modeTo remotely arm in Away or Stay mode with no delay To remotely deactivate X-10 devicesSystem will not enter speaker phone mode if Speaker Phone FeatureUsing the Speaker Phone Feature Speaker phone will be aborted ifGeneral Information $/$506670If InstalledSilencing a Fire Alarm Case of Fire$/$506670 BasementEmergency Evacuation Determine two means of escape from each room. One pathEscape quickly dont panic To Add/Delete a User or Change a Users Code 667081&7,216Security Codes Add a user codeExit Test Mode Testing the System to be conducted weeklyEntering Test Mode When testing is completed, exit the Test mode by enteringRoutine Care Trouble MessagesTypical Trouble Condition Displays LOW BATTo silence Low Battery Warning Tones at the Keypad Low Battery Conditions in Wireless SensorsChanging the ReadyGuard-REN System Battery Maintaining your systemSystem Low Battery Zones BypassedChime Event of Telephone Operational Problems Radio Frequency EmissionsTELEPHONE/MODEM Interface First Alert Professionals ReadyGuard-REN Other TestingGeneral Information Notifies Insert B = Burglary, F = FireFront Door Owners Insurance Premium Credit RequestFurnace Room Kitchen Basement 1st Floor WindowsAway Mode 12, 38Rechargeable, Nickel-Metal Hydride Battery Master UserDeath Or otAre not put in proper EverServicing Information ONE Year Limited Warranty Your security equipment or the Seller for product repair

1, K596-1 9 specifications

The First Alert K596-1 9,1 is a state-of-the-art smoke and carbon monoxide (CO) detector designed to enhance home safety. This innovative device combines advanced features and cutting-edge technology to provide reliable protection against two of the leading causes of accidental deaths in the home.

One of the standout features of the K596-1 is its **photoelectric smoke sensing technology**. This technology is particularly effective at detecting slow-smoldering fires, which typically produce larger particles of smoke. By using a light source and a sensor, the device can identify these particles quickly, thus reducing the likelihood of false alarms that are common with traditional ionization detectors.

In addition to smoke detection, the K596-1 also features a **carbon monoxide sensor**. CO is a colorless, odorless gas that can be fatal in high concentrations. The detector continuously monitors for this dangerous gas, providing peace of mind for families. If elevated levels are detected, the alarm will sound, alerting occupants to the potential danger.

The First Alert K596-1 is designed with **user-friendly features** in mind. An easy-to-read LED display provides real-time information on battery status and system functionality. The unit also includes a voice alert feature that announces the type of danger detected, whether smoke or carbon monoxide, making it easier for occupants to respond appropriately.

Battery life is another important characteristic of the K596-1. It utilizes a long-life battery that can last for several years, reducing the frequency of battery changes and ensuring that the device remains operational without constant maintenance. The easy-access battery compartment allows for a straightforward replacement when necessary.

Installation is simple, too, making the K596-1 accessible to users of all skill levels. The device can be mounted on walls or ceilings, and its compact design ensures that it blends seamlessly into any home environment.

In summary, the First Alert K596-1 9,1 is a crucial safety device that combines advanced detection capabilities with user-friendly features. Its photoelectric sensing technology and carbon monoxide detection work in tandem to provide comprehensive coverage against fire and gas hazards. With its easy installation and reliable performance, the K596-1 is a wise investment for anyone looking to enhance their home safety.
Top Page Image Contents