First Alert K596-1 9 manual Arming the System With No Delay, Quick Arming, To arm with no Delay

Page 15

6(&85,1*￿7+(￿35(0,6(6￿

Arming the System

Arming the System With No Delay

Use NO DELAY with STAY mode when you are staying home and do not expect anyone to use the entrance door.

Use NO DELAY with AWAY mode when the premises will be vacant for extended periods of time such as vacations, etc.

When armed with NO DELAY, the system will sound an alarm if a protected door or window is opened,

including the entrance door. You may leave through the entrance

door during the exit delay period without

causing an alarm, but an alarm will sound as soon as someone reenters.

 

To arm with NO DELAY:

 

 

 

 

 

 

 

+

AWAY

or

STAY

+

NO DELAY

Your user code

**

 

 

 

 

 

** See Quick Arming paragraph.

 

 

 

 

 

 

 

 

 

Quick Arming

If Quick Arm was programmed by the installer, you do not need to enter the security code to

system. Instead, simply press and hold down the desired arming key for at least 2 seconds. The security

 

 

code must always be used to

disarm the system, however.

 

 

 

 

 

 

To arm if Quick Arm is active:

 

 

or

 

hold down for at least 2 seconds

 

 

AWAY

STAY

 

To arm with NO DELAY if Quick Arm is active:

 

 

 

 

or

 

then

 

 

 

 

AWAY

STAY

NO DELAY

least 2 seconds

 

 

 

 

 

 

 

 

 

 

IMPORTANT:The Babysitter Code and Installer Code cannot disarm the system unless it was used to arm the system. In addition, if the system is armed by pressing and holding the Quick-Arm buttons, neither the Babysitter Code nor Installer Code can disarm the system.

arm the

hold down for at

– 15 –

Page 14 Page 16
Image 15
Page 14 Page 16
Contents 5HDG\*XDUG51 $%/2&217176 Function section for detailed information Features66702959 General InformationSecurity Codes General Operation Announced, the siren sounds Two-Way Voice FeatureOFF or until alarm bell timeout Memory of alarm displayMessage Center Volume Adjustment48,&.9,2667081&7,216 Security FunctionsTo set scheduling To remotely activate X-10 devicesTo remotely bypass a zone To remotely activate forced bypassGeneral About the Master KeypadBe repeated from its beginning Master Keypad DefinitionsKeys KEYKeys About the Display and Indicators Press Checking System StatusPress the Status Key System Can Be ArmedArming in Stay Mode Arming In Away ModeArming the System Arm Arming the System With No DelayTo arm with no Delay Quick ArmingExit Alarms Entry/Exit DelaysExit Delay Entry DelayPolice from a nearby safe location Memory of AlarmTo disarm the system and silence burglary alarms Disarming the SystemDisplaying Bypassed Zones Bypassing Protection ZonesBypassing Individual Zones Forced BypassPanic Keys / Chime Mode Chime ModePanic Keys Manual Paging Paging FeatureAutomatic Paging Code FormatTo activate X-10 devices 7 Device DescriptionsTo activate X-10 devices To deactivate X-10 devicesMessage Playback Message Recording/Playback/Volume ControlAdjusting the Volume Recording a MessagePerforming the AUX function Defining the AUX FunctionAM/PM Clock/CalendarScheduling User Interface Event Identifier Begin Time hourBegin Time am/pm End Time am/pm Begin Time minuteBegin Day End Time hourEntry Event Event Identifier EntriesEntry Day Day of Week EntriesRemote Phone Control Feature Using Remote Phone Control FeatureEnter To remotely deactivate X-10 devices To remotely arm in Stay modeTo remotely arm in Away or Stay mode with no delay To remotely disarm systemSpeaker phone will be aborted if Speaker Phone FeatureUsing the Speaker Phone Feature System will not enter speaker phone mode ifCase of Fire $/$506670If InstalledSilencing a Fire Alarm General InformationBasement $/$506670Emergency Evacuation Determine two means of escape from each room. One pathEscape quickly dont panic Add a user code 667081&7,216Security Codes To Add/Delete a User or Change a Users CodeWhen testing is completed, exit the Test mode by entering Testing the System to be conducted weeklyEntering Test Mode Exit Test ModeLOW BAT Trouble MessagesTypical Trouble Condition Displays Routine CareMaintaining your system Low Battery Conditions in Wireless SensorsChanging the ReadyGuard-REN System Battery To silence Low Battery Warning Tones at the KeypadSystem Low Battery Zones BypassedChime Event of Telephone Operational Problems Radio Frequency EmissionsTELEPHONE/MODEM Interface Notifies Insert B = Burglary, F = Fire TestingGeneral Information First Alert Professionals ReadyGuard-REN Other1st Floor Windows Owners Insurance Premium Credit RequestFurnace Room Kitchen Basement Front Door12, 38 Away ModeMaster User Rechargeable, Nickel-Metal Hydride BatteryEver Or otAre not put in proper DeathServicing Information Your security equipment or the Seller for product repair ONE Year Limited Warranty

1, K596-1 9 specifications

The First Alert K596-1 9,1 is a state-of-the-art smoke and carbon monoxide (CO) detector designed to enhance home safety. This innovative device combines advanced features and cutting-edge technology to provide reliable protection against two of the leading causes of accidental deaths in the home.

One of the standout features of the K596-1 is its **photoelectric smoke sensing technology**. This technology is particularly effective at detecting slow-smoldering fires, which typically produce larger particles of smoke. By using a light source and a sensor, the device can identify these particles quickly, thus reducing the likelihood of false alarms that are common with traditional ionization detectors.

In addition to smoke detection, the K596-1 also features a **carbon monoxide sensor**. CO is a colorless, odorless gas that can be fatal in high concentrations. The detector continuously monitors for this dangerous gas, providing peace of mind for families. If elevated levels are detected, the alarm will sound, alerting occupants to the potential danger.

The First Alert K596-1 is designed with **user-friendly features** in mind. An easy-to-read LED display provides real-time information on battery status and system functionality. The unit also includes a voice alert feature that announces the type of danger detected, whether smoke or carbon monoxide, making it easier for occupants to respond appropriately.

Battery life is another important characteristic of the K596-1. It utilizes a long-life battery that can last for several years, reducing the frequency of battery changes and ensuring that the device remains operational without constant maintenance. The easy-access battery compartment allows for a straightforward replacement when necessary.

Installation is simple, too, making the K596-1 accessible to users of all skill levels. The device can be mounted on walls or ceilings, and its compact design ensures that it blends seamlessly into any home environment.

In summary, the First Alert K596-1 9,1 is a crucial safety device that combines advanced detection capabilities with user-friendly features. Its photoelectric sensing technology and carbon monoxide detection work in tandem to provide comprehensive coverage against fire and gas hazards. With its easy installation and reliable performance, the K596-1 is a wise investment for anyone looking to enhance their home safety.
Top Page Image Contents