Quick Start
Introduction
The QUICK START section is designed to familiarize new users with the operation of the FOCUS 200 PLUS operating panel in under an hour. It will introduce you the FOCUS 200 PLUS’ four primary menus and guide you through the logic behind one or two operations from each menu.
Think of the QUICK START section as a “crash course” on how to access basic menus and functions of your new security system. After reading the QUICK START section and going through the exercises, users will be better able to define their particular control and programming needs and to pinpoint problems, then locate the needed information in this manual and follow the specific instructions confidently and efficiently.
Operating Panel Functions
The operating panel is the primary interface between you, the operator, and the electronic components forming the “brains” of your FOCUS 200 PLUS security system. The panel consists of a liquid crystal display (LCD) on the left and a numeric keypad (similar to the buttons on a TouchTone phone) on the right. Users can access most FOCUS 200 PLUS operations through the LCD. Some operations require both the LCD screen and the keypad.
Operating panel functions are divided into three main groups:
•Programming — Operations relate to system settings, user names, user ID numbers, schedules, names of points and groups, and time/date functions.
•System — Operations allow you to turn burglary protection on and off, bypass protection points, respond to system alarms, obtain a history log, and extend your site’s close time.
•Test — Operations enable operators to test protection points, security groups, and hardware.
–11 –