3.Press Previous or Next to display the specific Burglary group to be turned off.
System Operation (cont’d)
4.Press the “Group description” button to turn off that specific group.
5.Repeat steps 2 through 4 to turn off additional groups.
6.Press Continue to display Action Menu 1.
Turning Off One or More Burglary Groups Using a Key or Card Reader
1.Insert or swipe the access key or card. The green lamp will illuminate on the key/card reader. If you are using a key, turn the cylinder to unlock the door. If you are using a strike, pull the door open.
Note: If the green lamp does not light and the red lamp “winks” out momentarily, it indicates the system is rejecting the access attempt.
The system can reject access for the following reasons:
a.User does not have “irregular open” privilege, and the present time is outside the schedule or is a holiday.
b.“Lockout” option is selected, and the present time is outside the schedule or is a holiday.
c.User does not have “open” privilege, and group(s) are on.
d.User does not have “access” privilege to this group or area.
Resetting Current Alarms
Resetting alarms is used after one or more alarms have been activated and you have determined that the situation has returned to normal.
1.Using the operating panel’s numeric keypad, enter a valid ID code to display Action Menu 1 (if no Burglary groups are on) or the Turn Off Menu (if Burglary groups are on) and to deactivate all annunciating devices.
2.If Burglary groups are on, complete the steps under the heading Turning Off One or More Burglary Groups. When all Burglary groups are off, press Continue to display Action Menu 1.
–57 –