Heat & Glo LifeStyle SLR32 Top Vent - Horizontal Termination - continued, Venting with 3 elbows

1. Top Vent - Horizontal Termination - (continued)

					Top Vent - Horizontal Termination
						Venting with 3 elbows
					SLR32
V1 Minimum		H1 + H2 Maximum				V2	V1 + V2 Minimum
90° Elbow		6 ft.			1.8 m	*	*
1 ft.	305 mm	10 ft.			3.0 m	*	*
2 ft.	610 mm	12 ft.			3.7 m	*	*
3 ft.	914 mm	14 ft.			4.3 m	*	*
		H1	+ H2		MAX. =14 ft. (4.3 m)
		V1 + V2 + H1		+ H2 MAX. = 40 ft. (12.2 m)
*No specific restrictions on this value EXCEPT V1 + V2 + H cannot exceed 40 ft. (12.2 m)

Note: Use SLP Series components only.

Note: There MUST be a 25% reduction in total H when using flex vent except when using the simple up and out installation (see Figure 7.3).

H2

V2

H1

V1

Figure 7.6

Heat & Glo • SLR32 • 2269-900 Rev. E • 4/12 27