Heat & Glo LifeStyle SLR32 B. Mantel and Wall Projections, Failure to comply could cause fire

B. Mantel and Wall Projections		Combustible Mantel Legs Or Wall Projections
WARNING! Risk of Fire! Comply with all minimum clear-		Extending Past The Face Of The Fireplace
ances to combustibles as specified. Framing closer than the
minimums listed must be constructed entirely of noncom-
bustible materials (i.e., steel studs, concrete board, etc.)
Failure to comply could cause fire.
Note: For non-combustible fireplace finish material (marble,
stone, etc) specifications refer to Section 13.C.
Combustible Mantels			2 IN.
		FIREPLACE	MINIMUM 3 FT. MAXIMUM
1/2 in.		OPENING
Thick Wall	12 in.		6 IN.
Sheathing			MINIMUM
	MAX.	Figure 13.7 Combustible Mantel Leg or Wall Projections
			(Acceptable on both sides of opening)
	14 in. MEASUREMENT FROM TOP OF
	MIN. FIREPLACE OPENING	Non-combustible Mantel Legs Or Wall Projections
		Extending Past The Face Of The Fireplace

Figure 13.5 Clearances To Combustibles Mantels Or Other

Combustibles Above Appliance

Non-combustible Mantels			FIREPLACE	3 IN.	UNLIMITED
				MINIMUM
			OPENING
	1/2 IN.
				7 IN.
	Thick Wall	12 IN.
	Sheathing
		MAX.	Figure 13.8 Non-Combustible Mantel Leg or Wall Projections
			(Acceptable on both sides of opening)
		14 IN.
		MIN.
	MEASUREMENT
	FROM TOP OF
	FIREPLACE
	OPENING	1 IN.MIN.
		4 IN.
		MAX.
Figure 13.6 Clearances To Non-Combustible Mantels Or Other
	Non-Combustibles Above Appliance
52		Heat & Glo • SLR32 • 2269-900 Rev. E • 4/12