Heat & Glo LifeStyle 6000TRI-SP manual Venting with ONE 1 90 Elbow, Venting with One 90 Elbow

VENTING WITH ONE (1) 90° ELBOW

V		H
1' MIN. (305mm)	2'	MAX. (610mm)
2' MIN. (610mm)	4'	MAX.	(1.22m)
3' MIN. (914mm)	6'	MAX.	(1.86m)
4' MIN. (1.22m)	8'	MAX.	(2.4m)
V+H=40' MAX. (12.4m)	H = 8' MAX. (2.4m)

NOTE: On vertical venting configurations where

the vertical component is over 10 feet, install V the flue restrictor included in the manual bag assembly to improve flame appearance.

Figure 12. Venting with One 90° Elbow

H

VENTING WITH ONE (1) 90° ELBOW

V (FT.)	H (FT.)
1' MIN. (305mm)	5' MAX. (1.52m)
2' MIN. (610mm)	10' MAX. (3.1m)
3' MIN. (914mm)	15' MAX. (4.65m)
4' MIN. (1.22m)	20' MAX. (6.2m)

V+H= 40’ MAX. (12.4MM) H = 20' MAX. (6.2m)

H

V

H

V

NOTE: For corner installations: A 6-inch (152mm) section of straight pipe may need to be attached to the fireplace before a 90o elbow, to allow the vent pipe to clear the top standoffs.

NOTE: If a 90o elbow is first attached to the unit, the maximum horizontal run is 3-feet (914mm).

Figure 13. Venting with One 90° Elbow

Heat & Glo • 6000TRI-IPI, 6000TRI-SP • 385-901 Rev. F • 5/05 17