Dansons Group IPP Bay View Insert / Built-In, IPP, FPP, FPP, IPP

EXHAUST SYSTEMS . . . Continued

PELLET VENT TERMINATION: (Figures 7 & 8)

Termination must be a minimum of 6” above the chimney (B) (note: the chimney must meet local codes for height above the roof or other obstructions)

Must have an approved cap (to prevent water from entering) or a 45* elbow downturn

If the termination is located on a windy side of house, an approved house shield is recommended to

prevent soot from accumulating on the side of the house.	B

Must not be located where snow or other materials will plug it.
Must have a “Metal Seal Plate” or “Wall Thimble” at point (A)
	A	A
A	A	F
4	12”	G
Figure 7		Figure 8

VENT TERMINATION CLEARANCES:

•Horizontal terminations must protrude 12” from the wall, vertical terminations 24”

3’

2’

10’

Figure 9

AMinimum 4’ clearance below or beside any door or window which opens.

BMinimum 1’ clearance above any door or window that opens.

CMinimum 3’ clearance from any adjacent building.

DMinimum 7’ clearance above any grade when adjacent to public walkways. NOTE: Vent may not terminate in covered walkway or breezeway.

EMinimum 2’ clearance above any grass, plants, or other combustible material.

FMinimum 3’ clearance from any forced air intake of any other appliance.

GMinimum 2’ clearance below eves or overhang.

HMinimum 1’ clearance horizontally from combustible wall.


X	Must be a minimum of 36” above the roof and 24” above the highest point of the roof within 10’.
Canadian Comfort Industries V04		11	PELPRO OWNERS MANUAL
Copyright 2004		www.pelprostoves.com	Dansons Group Inc.

IPP Bay View Insert / Built-In, FPP, IPP, FPP Freestanding, IPP, FPP specifications

Dansons Group is renowned for its innovative approach to outdoor and indoor heating solutions, especially with their FPP Freestanding and IPP Bay View Insert/Built-In models. These products are designed to cater to the diverse needs of homeowners seeking both functionality and aesthetics in their heating appliances.

The FPP Freestanding model is a perfect blend of traditional charm and modern technology. It serves as an impressive centerpiece in any setting, providing warmth and ambiance to any space. One of its standout features is its large viewing area, which allows for an unobstructed view of the flames, creating a cozy and inviting atmosphere. It is equipped with advanced combustion technology that ensures efficient burning, maximizing heat output while minimizing emissions. This model is also designed to accommodate a range of fuel options, including wood and pellets, giving users the flexibility to choose what works best for them.

On the other hand, the IPP Bay View Insert/Built-In model offers a seamless integration into existing fireplaces or as a built-in feature in new constructions. This model emphasizes both performance and aesthetics, providing a sleek finish that enhances any room's decor. One of the key technologies in the IPP is its advanced blowers and distribution system, which efficiently circulates heat throughout the space, ensuring even warmth without hot spots. Additionally, the IPP incorporates a unique air-wash system that keeps the glass clean, allowing for a clear view of the flickering flames.

Both the FPP and IPP series prioritize ease of use and maintenance. They are designed with user-friendly controls that allow for easy operation and customization of heat settings. Moreover, Dansons Group emphasizes safety, incorporating features such as automatic shut-off mechanisms and cool-touch exteriors to prevent accidental burns.

In summary, the Dansons Group FPP Freestanding and IPP Bay View Insert/Built-In models stand out for their combination of aesthetic appeal, technological advancement, and user-friendly features. Whether you're looking for a statement piece or a practical heating solution, these products are designed to create a warm ambiance while ensuring efficiency and safety.