Enviro DV36 owner manual Kit Contents

Secondary Installation

QUALIFIED INSTALLERS ONLY

OPTIONAL FAN KIT INSTALLATION:

The optional fan is thermostatically controlled and it will not operate if the appliance is cold. A few minutes after the appliance is lit and the variable speed control is set at a desired setting, the fan will automatically turn on. The fan will automatically turn off a few minutes after the appliance is shut off.

		Fan Control
	Black		Black
			120oF (49oC)		Cord
			Temperature Sensor
				White	Electrical
					Power
White		Black	Black
				Green
	Electrical Cord
White	Black	Green
White	Black	Green/Yellow
	Fan

The fireplace must be electrically connected and grounded in accordance with local codes or, in the absence of local codes, with the current CSA C22.1 Canadian Electrical Code Part 1, Safety Standards For Electrical Installations, or The National Electrical Code ANSI / NFPA 70 in the US.

WARNING: The electrical grounding instructions must be followed. The fan kit is equipped with a three-prong (grounding) plug for your protection against shock hazard, and should be plugged directly into a properly grounded three-prong outlet. DO NOT cut or remove the grounding prong from this plug.

CAUTION: When servicing controls, label all wires prior to disconnection. Wiring errors can cause improper and dangerous operation. Verify proper operation after servicing.

Figure 53. Wiring Diagram For Fan Control.

Kit Contents:

This kit includes a fan assembly (a fan within a box housing connected by a wire to the fan control box then ends at a three prong plug) and two (2) T-20 torx screws.

Please ensure that your fan kit has not been damaged. If so, contact your dealer, distributor, or courier company before starting this installation.

Figure 54. Placing Fan Kit Into DV36

33