I8 Water Cooker Computer Service
Pitco P/N PP11375
To deactivate the cook timer on a product key, enter in a cook time of zero for this key.
2.2.2 Shake Time
Shake Time is an alarm that sounds while a cook timer is running to prompt an operator to shake the product in the basket. The default value for shake time on a product key is zero, which disables this alarm. To enable the shake time alarm, a
With the display showing [nSH mm:ss] (where n is the desired product key, SH means Shake and mm:ss is the time value in minutes:seconds), enter the new shake time value using the product keys 
Press the clock key to save/exit this setting and proceed to the next step(2.2.3) or press the program key three times to exit out of this programming option and return to normal operation.
2.2.3 Hold Time
After a product is cooked, it may stand in bins for a period of time. Hold Time provides a timer to control how long a product stands in a bin. After the hold timer expires, an alarm will sound to inform the operator to cook more product. The default value for hold time on a product key is zero, which disables this alarm/timer. To enable the hold timer/alarm, a
With the display showing [nHDh.mm:ss] (where n is the desired product key, HD means Hold and h.mm:ss is the time value in hours.minutes:seconds), enter 
the new hold time value using the product keys 
three times to save and exit out of this programming option. The control
display will show either [READY], [ACT xxx’F], or [FILLING ] and the control will return to normal operation.
3.0To enter Level 2 Options Programming(store manager):
Note: The factory default setting for this control does not require an operator password to be entered. However, the operator password requirement and value may be changed in section 3.2. Entry of a password when NOT required will not interfere with the programming process.
While there are no cook timers running, and the control display shows either [READY], [ACT xxx’F], or [FILLING ], press the program key. If the control displays [PASS ], enter the manager password(or the default manager password 6684) using the product keys
Menu, press product key 0. The control display will show [SELECT ].
The key indicators that light up will have options that can be adjusted. Any key indicators that do not light up do not have options that can be adjusted.
0
All of the Level 2 Options Menu programming options shown below must begin with the control displaying this prompt [SELECT ].
6 |