Orbit Manufacturing ORBIT-6 RP-206 manual System Codes Locations

Location: 04 Callback UD Phone #

Enables greater security for remote Upload/Download operation. This is a number to which the alarm company computer, equipped with the U/D software, will be connected.

When a call is made from a computer, using U/D software, to the Orbit-6 panel, the system will hang-up and call back using this UD phone number. Up to 24 digits can be entered into the U/D phone number, include all the digits and functions as above in Location 02. To delete an existing phone number press #.

PURPOSE: to assign the system’s Central Station Account Number

hexadecimal account numbers (those using 0 through 9 and A through F) are accepted by the ORBIT-6; use the key combinations below to enter hexadecimal digits “A” through “F”:

“0” will not send a digit to the central station, to send “0” use “A” digit

SYSTEM CODES: LOCATIONS 06-10

PURPOSE: to provide data security during Upload/Download operations

this same Access Code must subsequently be entered into the corresponding account profile in the Upload/Download software (along with the Remote ID codes, see

PURPOSE: to provide data security during Upload/Download operations this same Remote ID Code must subsequently be entered into the corresponding account profile

PURPOSE: the installer code is used by alarm company personnel authorized to modify the system’s parameters It is recommended to change the “factory default”